diff options
| -rw-r--r-- | drivers/usb/dwc3/dwc3-qcom.c | 78 |
1 files changed, 68 insertions, 10 deletions
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 8a9018ca650c..ded2ca86670c 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -83,6 +83,8 @@ struct dwc3_qcom { bool pm_suspended; struct icc_path *icc_path_ddr; struct icc_path *icc_path_apps; + + enum usb_role current_role; }; #define to_dwc3_qcom(d) container_of((d), struct dwc3_qcom, dwc) @@ -111,10 +113,6 @@ static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val) readl(base + offset); } -/* - * TODO: Make the in-core role switching code invoke dwc3_qcom_vbus_override_enable(), - * validate that the in-core extcon support is functional - */ static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable) { if (enable) { @@ -560,6 +558,55 @@ static int dwc3_qcom_setup_irq(struct dwc3_qcom *qcom, struct platform_device *p return 0; } +static void dwc3_qcom_set_role_notifier(struct dwc3 *dwc, enum usb_role next_role) +{ + struct dwc3_qcom *qcom = to_dwc3_qcom(dwc); + + if (qcom->current_role == next_role) + return; + + if (pm_runtime_resume_and_get(qcom->dev)) { + dev_dbg(qcom->dev, "Failed to resume device\n"); + return; + } + + if (qcom->current_role == USB_ROLE_DEVICE) + dwc3_qcom_vbus_override_enable(qcom, false); + else if (qcom->current_role != USB_ROLE_DEVICE) + dwc3_qcom_vbus_override_enable(qcom, true); + + pm_runtime_mark_last_busy(qcom->dev); + pm_runtime_put_sync(qcom->dev); + + /* + * Current role changes via usb_role_switch_set_role callback protected + * internally by mutex lock. + */ + qcom->current_role = next_role; +} + +static void dwc3_qcom_run_stop_notifier(struct dwc3 *dwc, bool is_on) +{ + struct dwc3_qcom *qcom = to_dwc3_qcom(dwc); + + /* + * When autosuspend is enabled and controller goes to suspend + * after removing UDC from userspace, the next UDC write needs + * setting of QSCRATCH VBUS_VALID to "1" to generate a connect + * done event. + */ + if (!is_on) + return; + + dwc3_qcom_vbus_override_enable(qcom, true); + pm_runtime_mark_last_busy(qcom->dev); +} + +struct dwc3_glue_ops dwc3_qcom_glue_ops = { + .pre_set_role = dwc3_qcom_set_role_notifier, + .pre_run_stop = dwc3_qcom_run_stop_notifier, +}; + static int dwc3_qcom_probe(struct platform_device *pdev) { struct dwc3_probe_data probe_data = {}; @@ -636,6 +683,23 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ignore_pipe_clk) dwc3_qcom_select_utmi_clk(qcom); + qcom->mode = usb_get_dr_mode(dev); + + if (qcom->mode == USB_DR_MODE_HOST) { + qcom->current_role = USB_ROLE_HOST; + } else if (qcom->mode == USB_DR_MODE_PERIPHERAL) { + qcom->current_role = USB_ROLE_DEVICE; + dwc3_qcom_vbus_override_enable(qcom, true); + } else { + if ((device_property_read_bool(dev, "usb-role-switch")) && + (usb_get_role_switch_default_mode(dev) == USB_DR_MODE_HOST)) + qcom->current_role = USB_ROLE_HOST; + else + qcom->current_role = USB_ROLE_DEVICE; + } + + qcom->dwc.glue_ops = &dwc3_qcom_glue_ops; + qcom->dwc.dev = dev; probe_data.dwc = &qcom->dwc; probe_data.res = &res; @@ -650,12 +714,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ret) goto remove_core; - qcom->mode = usb_get_dr_mode(dev); - - /* enable vbus override for device mode */ - if (qcom->mode != USB_DR_MODE_HOST) - dwc3_qcom_vbus_override_enable(qcom, true); - wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source"); device_init_wakeup(&pdev->dev, wakeup_source); |