aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/platform/surface/surface_aggregator_registry.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/surface/surface_aggregator_registry.c')
-rw-r--r--drivers/platform/surface/surface_aggregator_registry.c371
1 files changed, 1 insertions, 370 deletions
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index c680792a037e..0cbb7f3a6b2d 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -11,14 +11,11 @@
#include <linux/acpi.h>
#include <linux/kernel.h>
-#include <linux/limits.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/types.h>
-#include <linux/workqueue.h>
-#include <linux/surface_aggregator/controller.h>
#include <linux/surface_aggregator/device.h>
@@ -286,335 +283,6 @@ static const struct software_node *ssam_node_group_sp8[] = {
};
-/* -- SSAM generic subsystem hub driver framework. -------------------------- */
-
-enum ssam_hub_state {
- SSAM_HUB_UNINITIALIZED, /* Only set during initialization. */
- SSAM_HUB_CONNECTED,
- SSAM_HUB_DISCONNECTED,
-};
-
-enum ssam_hub_flags {
- SSAM_HUB_HOT_REMOVED,
-};
-
-struct ssam_hub {
- struct ssam_device *sdev;
-
- enum ssam_hub_state state;
- unsigned long flags;
-
- struct delayed_work update_work;
- unsigned long connect_delay;
-
- struct ssam_event_notifier notif;
-
- int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
-};
-
-static void ssam_hub_update_workfn(struct work_struct *work)
-{
- struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
- enum ssam_hub_state state;
- int status = 0;
-
- status = hub->get_state(hub, &state);
- if (status)
- return;
-
- /*
- * There is a small possibility that hub devices were hot-removed and
- * re-added before we were able to remove them here. In that case, both
- * the state returned by get_state() and the state of the hub will
- * equal SSAM_HUB_CONNECTED and we would bail early below, which would
- * leave child devices without proper (re-)initialization and the
- * hot-remove flag set.
- *
- * Therefore, we check whether devices have been hot-removed via an
- * additional flag on the hub and, in this case, override the returned
- * hub state. In case of a missed disconnect (i.e. get_state returned
- * "connected"), we further need to re-schedule this work (with the
- * appropriate delay) as the actual connect work submission might have
- * been merged with this one.
- *
- * This then leads to one of two cases: Either we submit an unnecessary
- * work item (which will get ignored via either the queue or the state
- * checks) or, in the unlikely case that the work is actually required,
- * double the normal connect delay.
- */
- if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
- if (state == SSAM_HUB_CONNECTED)
- schedule_delayed_work(&hub->update_work, hub->connect_delay);
-
- state = SSAM_HUB_DISCONNECTED;
- }
-
- if (hub->state == state)
- return;
- hub->state = state;
-
- if (hub->state == SSAM_HUB_CONNECTED)
- status = ssam_device_register_clients(hub->sdev);
- else
- ssam_remove_clients(&hub->sdev->dev);
-
- if (status)
- dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
-}
-
-static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
-{
- struct ssam_device *sdev = to_ssam_device(dev);
-
- if (is_ssam_device(dev))
- ssam_device_mark_hot_removed(sdev);
-
- return 0;
-}
-
-static void ssam_hub_update(struct ssam_hub *hub, bool connected)
-{
- unsigned long delay;
-
- /* Mark devices as hot-removed before we remove any. */
- if (!connected) {
- set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
- device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
- }
-
- /*
- * Delay update when the base/keyboard cover is being connected to give
- * devices/EC some time to set up.
- */
- delay = connected ? hub->connect_delay : 0;
-
- schedule_delayed_work(&hub->update_work, delay);
-}
-
-static int __maybe_unused ssam_hub_resume(struct device *dev)
-{
- struct ssam_hub *hub = dev_get_drvdata(dev);
-
- schedule_delayed_work(&hub->update_work, 0);
- return 0;
-}
-static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
-
-static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub)
-{
- int status;
-
- hub->sdev = sdev;
- hub->state = SSAM_HUB_UNINITIALIZED;
-
- INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
-
- ssam_device_set_drvdata(sdev, hub);
-
- status = ssam_device_notifier_register(sdev, &hub->notif);
- if (status)
- return status;
-
- schedule_delayed_work(&hub->update_work, 0);
- return 0;
-}
-
-static void ssam_hub_remove(struct ssam_device *sdev)
-{
- struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
-
- ssam_device_notifier_unregister(sdev, &hub->notif);
- cancel_delayed_work_sync(&hub->update_work);
- ssam_remove_clients(&sdev->dev);
-}
-
-
-/* -- SSAM base-hub driver. ------------------------------------------------- */
-
-/*
- * Some devices (especially battery) may need a bit of time to be fully usable
- * after being (re-)connected. This delay has been determined via
- * experimentation.
- */
-#define SSAM_BASE_UPDATE_CONNECT_DELAY msecs_to_jiffies(2500)
-
-SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
- .target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
- .command_id = 0x0d,
- .instance_id = 0x00,
-});
-
-#define SSAM_BAS_OPMODE_TABLET 0x00
-#define SSAM_EVENT_BAS_CID_CONNECTION 0x0c
-
-static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
-{
- u8 opmode;
- int status;
-
- status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode);
- if (status < 0) {
- dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status);
- return status;
- }
-
- if (opmode != SSAM_BAS_OPMODE_TABLET)
- *state = SSAM_HUB_CONNECTED;
- else
- *state = SSAM_HUB_DISCONNECTED;
-
- return 0;
-}
-
-static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
-{
- struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
-
- if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
- return 0;
-
- if (event->length < 1) {
- dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
- return 0;
- }
-
- ssam_hub_update(hub, event->data[0]);
-
- /*
- * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
- * consumed by the detachment system driver. We're just a (more or less)
- * silent observer.
- */
- return 0;
-}
-
-static int ssam_base_hub_probe(struct ssam_device *sdev)
-{
- struct ssam_hub *hub;
-
- hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
- if (!hub)
- return -ENOMEM;
-
- hub->notif.base.priority = INT_MAX; /* This notifier should run first. */
- hub->notif.base.fn = ssam_base_hub_notif;
- hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
- hub->notif.event.id.target_category = SSAM_SSH_TC_BAS,
- hub->notif.event.id.instance = 0,
- hub->notif.event.mask = SSAM_EVENT_MASK_NONE;
- hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
-
- hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY;
- hub->get_state = ssam_base_hub_query_state;
-
- return ssam_hub_setup(sdev, hub);
-}
-
-static const struct ssam_device_id ssam_base_hub_match[] = {
- { SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00) },
- { },
-};
-
-static struct ssam_device_driver ssam_base_hub_driver = {
- .probe = ssam_base_hub_probe,
- .remove = ssam_hub_remove,
- .match_table = ssam_base_hub_match,
- .driver = {
- .name = "surface_aggregator_base_hub",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .pm = &ssam_hub_pm_ops,
- },
-};
-
-
-/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
-
-/*
- * Some devices may need a bit of time to be fully usable after being
- * (re-)connected. This delay has been determined via experimentation.
- */
-#define SSAM_KIP_UPDATE_CONNECT_DELAY msecs_to_jiffies(250)
-
-#define SSAM_EVENT_KIP_CID_CONNECTION 0x2c
-
-SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, {
- .target_category = SSAM_SSH_TC_KIP,
- .target_id = 0x01,
- .command_id = 0x2c,
- .instance_id = 0x00,
-});
-
-static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state)
-{
- int status;
- u8 connected;
-
- status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected);
- if (status < 0) {
- dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
- return status;
- }
-
- *state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
- return 0;
-}
-
-static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
-{
- struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
-
- if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
- return 0; /* Return "unhandled". */
-
- if (event->length < 1) {
- dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
- return 0;
- }
-
- ssam_hub_update(hub, event->data[0]);
- return SSAM_NOTIF_HANDLED;
-}
-
-static int ssam_kip_hub_probe(struct ssam_device *sdev)
-{
- struct ssam_hub *hub;
-
- hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
- if (!hub)
- return -ENOMEM;
-
- hub->notif.base.priority = INT_MAX; /* This notifier should run first. */
- hub->notif.base.fn = ssam_kip_hub_notif;
- hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
- hub->notif.event.id.target_category = SSAM_SSH_TC_KIP,
- hub->notif.event.id.instance = 0,
- hub->notif.event.mask = SSAM_EVENT_MASK_TARGET;
- hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
-
- hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY;
- hub->get_state = ssam_kip_get_connection_state;
-
- return ssam_hub_setup(sdev, hub);
-}
-
-static const struct ssam_device_id ssam_kip_hub_match[] = {
- { SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00) },
- { },
-};
-
-static struct ssam_device_driver ssam_kip_hub_driver = {
- .probe = ssam_kip_hub_probe,
- .remove = ssam_hub_remove,
- .match_table = ssam_kip_hub_match,
- .driver = {
- .name = "surface_kip_hub",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .pm = &ssam_hub_pm_ops,
- },
-};
-
-
/* -- SSAM platform/meta-hub driver. ---------------------------------------- */
static const struct acpi_device_id ssam_platform_hub_match[] = {
@@ -727,44 +395,7 @@ static struct platform_driver ssam_platform_hub_driver = {
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
-
-
-/* -- Module initialization. ------------------------------------------------ */
-
-static int __init ssam_device_hub_init(void)
-{
- int status;
-
- status = platform_driver_register(&ssam_platform_hub_driver);
- if (status)
- goto err_platform;
-
- status = ssam_device_driver_register(&ssam_base_hub_driver);
- if (status)
- goto err_base;
-
- status = ssam_device_driver_register(&ssam_kip_hub_driver);
- if (status)
- goto err_kip;
-
- return 0;
-
-err_kip:
- ssam_device_driver_unregister(&ssam_base_hub_driver);
-err_base:
- platform_driver_unregister(&ssam_platform_hub_driver);
-err_platform:
- return status;
-}
-module_init(ssam_device_hub_init);
-
-static void __exit ssam_device_hub_exit(void)
-{
- ssam_device_driver_unregister(&ssam_kip_hub_driver);
- ssam_device_driver_unregister(&ssam_base_hub_driver);
- platform_driver_unregister(&ssam_platform_hub_driver);
-}
-module_exit(ssam_device_hub_exit);
+module_platform_driver(ssam_platform_hub_driver);
MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
MODULE_DESCRIPTION("Device-registry for Surface System Aggregator Module");