aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/gpio-twl4030.c52
-rw-r--r--drivers/input/touchscreen/ads7846.c113
-rw-r--r--drivers/mfd/tps65010.c14
-rw-r--r--drivers/mmc/host/omap.c46
-rw-r--r--drivers/usb/musb/musb_core.c1
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/tusb6010.c53
-rw-r--r--drivers/video/fbdev/omap/lcd_mipid.c10
8 files changed, 175 insertions, 116 deletions
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c1bb2c3ca6f2..446599ac234a 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -17,7 +17,9 @@
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/irq.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
@@ -465,8 +467,7 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
REG_GPIO_DEBEN1, 3);
}
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
- struct twl4030_gpio_platform_data *pdata)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
{
struct twl4030_gpio_platform_data *omap_twl_info;
@@ -474,9 +475,6 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
if (!omap_twl_info)
return NULL;
- if (pdata)
- *omap_twl_info = *pdata;
-
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
"ti,use-leds");
@@ -504,9 +502,18 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
return 0;
}
+/* Called from the registered devm action */
+static void gpio_twl4030_power_off_action(void *data)
+{
+ struct gpio_desc *d = data;
+
+ gpiod_unexport(d);
+ gpiochip_free_own_desc(d);
+}
+
static int gpio_twl4030_probe(struct platform_device *pdev)
{
- struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct twl4030_gpio_platform_data *pdata;
struct device_node *node = pdev->dev.of_node;
struct gpio_twl4030_priv *priv;
int ret, irq_base;
@@ -546,9 +553,7 @@ no_irqs:
mutex_init(&priv->mutex);
- if (node)
- pdata = of_gpio_twl4030(&pdev->dev, pdata);
-
+ pdata = of_gpio_twl4030(&pdev->dev);
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform data is missing\n");
return -ENXIO;
@@ -585,17 +590,32 @@ no_irqs:
goto out;
}
- platform_set_drvdata(pdev, priv);
+ /*
+ * Special quirk for the OMAP3 to hog and export a WLAN power
+ * GPIO.
+ */
+ if (IS_ENABLED(CONFIG_ARCH_OMAP3) &&
+ of_machine_is_compatible("compulab,omap3-sbc-t3730")) {
+ struct gpio_desc *d;
- if (pdata->setup) {
- int status;
+ d = gpiochip_request_own_desc(&priv->gpio_chip,
+ 2, "wlan pwr",
+ GPIO_ACTIVE_HIGH,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(d))
+ return dev_err_probe(&pdev->dev, PTR_ERR(d),
+ "unable to hog wlan pwr GPIO\n");
+
+ gpiod_export(d, 0);
+
+ ret = devm_add_action_or_reset(&pdev->dev, gpio_twl4030_power_off_action, d);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to install power off handler\n");
- status = pdata->setup(&pdev->dev, priv->gpio_chip.base,
- TWL4030_GPIO_MAX);
- if (status)
- dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
+ platform_set_drvdata(pdev, priv);
out:
return ret;
}
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index bb1058b1e7fd..40eb27f1b23f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -24,11 +24,8 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/pm.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
#include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/consumer.h>
@@ -140,7 +137,7 @@ struct ads7846 {
int (*filter)(void *data, int data_idx, int *val);
void *filter_data;
int (*get_pendown_state)(void);
- int gpio_pendown;
+ struct gpio_desc *gpio_pendown;
void (*wait_for_sync)(void);
};
@@ -223,7 +220,7 @@ static int get_pendown_state(struct ads7846 *ts)
if (ts->get_pendown_state)
return ts->get_pendown_state();
- return !gpio_get_value(ts->gpio_pendown);
+ return gpiod_get_value(ts->gpio_pendown);
}
static void ads7846_report_pen_up(struct ads7846 *ts)
@@ -989,8 +986,6 @@ static int ads7846_setup_pendown(struct spi_device *spi,
struct ads7846 *ts,
const struct ads7846_platform_data *pdata)
{
- int err;
-
/*
* REVISIT when the irq can be triggered active-low, or if for some
* reason the touchscreen isn't hooked up, we don't need to access
@@ -999,25 +994,15 @@ static int ads7846_setup_pendown(struct spi_device *spi,
if (pdata->get_pendown_state) {
ts->get_pendown_state = pdata->get_pendown_state;
- } else if (gpio_is_valid(pdata->gpio_pendown)) {
-
- err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
- GPIOF_IN, "ads7846_pendown");
- if (err) {
- dev_err(&spi->dev,
- "failed to request/setup pendown GPIO%d: %d\n",
- pdata->gpio_pendown, err);
- return err;
+ } else {
+ ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN);
+ if (IS_ERR(ts->gpio_pendown)) {
+ dev_err(&spi->dev, "failed to request pendown GPIO\n");
+ return PTR_ERR(ts->gpio_pendown);
}
-
- ts->gpio_pendown = pdata->gpio_pendown;
-
if (pdata->gpio_pendown_debounce)
- gpiod_set_debounce(gpio_to_desc(ts->gpio_pendown),
+ gpiod_set_debounce(ts->gpio_pendown,
pdata->gpio_pendown_debounce);
- } else {
- dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
- return -EINVAL;
}
return 0;
@@ -1119,7 +1104,6 @@ static int ads7846_setup_spi_msg(struct ads7846 *ts,
return 0;
}
-#ifdef CONFIG_OF
static const struct of_device_id ads7846_dt_ids[] = {
{ .compatible = "ti,tsc2046", .data = (void *) 7846 },
{ .compatible = "ti,ads7843", .data = (void *) 7843 },
@@ -1130,20 +1114,14 @@ static const struct of_device_id ads7846_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
-static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+static const struct ads7846_platform_data *ads7846_get_props(struct device *dev)
{
struct ads7846_platform_data *pdata;
- struct device_node *node = dev->of_node;
- const struct of_device_id *match;
+ const struct platform_device_id *pdev_id;
u32 value;
- if (!node) {
- dev_err(dev, "Device does not have associated DT data\n");
- return ERR_PTR(-EINVAL);
- }
-
- match = of_match_device(ads7846_dt_ids, dev);
- if (!match) {
+ pdev_id = device_get_match_data(dev);
+ if (!pdev_id) {
dev_err(dev, "Unknown device model\n");
return ERR_PTR(-EINVAL);
}
@@ -1152,60 +1130,51 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
if (!pdata)
return ERR_PTR(-ENOMEM);
- pdata->model = (unsigned long)match->data;
+ pdata->model = (unsigned long)pdev_id->driver_data;
- of_property_read_u16(node, "ti,vref-delay-usecs",
- &pdata->vref_delay_usecs);
- of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv);
- pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
+ device_property_read_u16(dev, "ti,vref-delay-usecs",
+ &pdata->vref_delay_usecs);
+ device_property_read_u16(dev, "ti,vref-mv", &pdata->vref_mv);
+ pdata->keep_vref_on = device_property_read_bool(dev, "ti,keep-vref-on");
- pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy");
+ pdata->swap_xy = device_property_read_bool(dev, "ti,swap-xy");
- of_property_read_u16(node, "ti,settle-delay-usec",
- &pdata->settle_delay_usecs);
- of_property_read_u16(node, "ti,penirq-recheck-delay-usecs",
- &pdata->penirq_recheck_delay_usecs);
+ device_property_read_u16(dev, "ti,settle-delay-usec",
+ &pdata->settle_delay_usecs);
+ device_property_read_u16(dev, "ti,penirq-recheck-delay-usecs",
+ &pdata->penirq_recheck_delay_usecs);
- of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms);
- of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms);
+ device_property_read_u16(dev, "ti,x-plate-ohms", &pdata->x_plate_ohms);
+ device_property_read_u16(dev, "ti,y-plate-ohms", &pdata->y_plate_ohms);
- of_property_read_u16(node, "ti,x-min", &pdata->x_min);
- of_property_read_u16(node, "ti,y-min", &pdata->y_min);
- of_property_read_u16(node, "ti,x-max", &pdata->x_max);
- of_property_read_u16(node, "ti,y-max", &pdata->y_max);
+ device_property_read_u16(dev, "ti,x-min", &pdata->x_min);
+ device_property_read_u16(dev, "ti,y-min", &pdata->y_min);
+ device_property_read_u16(dev, "ti,x-max", &pdata->x_max);
+ device_property_read_u16(dev, "ti,y-max", &pdata->y_max);
/*
* touchscreen-max-pressure gets parsed during
* touchscreen_parse_properties()
*/
- of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min);
- if (!of_property_read_u32(node, "touchscreen-min-pressure", &value))
+ device_property_read_u16(dev, "ti,pressure-min", &pdata->pressure_min);
+ if (!device_property_read_u32(dev, "touchscreen-min-pressure", &value))
pdata->pressure_min = (u16) value;
- of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max);
+ device_property_read_u16(dev, "ti,pressure-max", &pdata->pressure_max);
- of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max);
- if (!of_property_read_u32(node, "touchscreen-average-samples", &value))
+ device_property_read_u16(dev, "ti,debounce-max", &pdata->debounce_max);
+ if (!device_property_read_u32(dev, "touchscreen-average-samples", &value))
pdata->debounce_max = (u16) value;
- of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol);
- of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep);
+ device_property_read_u16(dev, "ti,debounce-tol", &pdata->debounce_tol);
+ device_property_read_u16(dev, "ti,debounce-rep", &pdata->debounce_rep);
- of_property_read_u32(node, "ti,pendown-gpio-debounce",
+ device_property_read_u32(dev, "ti,pendown-gpio-debounce",
&pdata->gpio_pendown_debounce);
- pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
- of_property_read_bool(node, "linux,wakeup");
-
- pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
+ pdata->wakeup = device_property_read_bool(dev, "wakeup-source") ||
+ device_property_read_bool(dev, "linux,wakeup");
return pdata;
}
-#else
-static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
-{
- dev_err(dev, "no platform data defined\n");
- return ERR_PTR(-EINVAL);
-}
-#endif
static void ads7846_regulator_disable(void *regulator)
{
@@ -1269,7 +1238,7 @@ static int ads7846_probe(struct spi_device *spi)
pdata = dev_get_platdata(dev);
if (!pdata) {
- pdata = ads7846_probe_dt(dev);
+ pdata = ads7846_get_props(dev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
@@ -1426,7 +1395,7 @@ static struct spi_driver ads7846_driver = {
.driver = {
.name = "ads7846",
.pm = pm_sleep_ptr(&ads7846_pm),
- .of_match_table = of_match_ptr(ads7846_dt_ids),
+ .of_match_table = ads7846_dt_ids,
},
.probe = ads7846_probe,
.remove = ads7846_remove,
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index fb733288cca3..faea4ff44c6f 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -506,12 +506,8 @@ static void tps65010_remove(struct i2c_client *client)
struct tps65010 *tps = i2c_get_clientdata(client);
struct tps65010_board *board = dev_get_platdata(&client->dev);
- if (board && board->teardown) {
- int status = board->teardown(client, board->context);
- if (status < 0)
- dev_dbg(&client->dev, "board %s %s err %d\n",
- "teardown", client->name, status);
- }
+ if (board && board->teardown)
+ board->teardown(client, &tps->chip);
if (client->irq > 0)
free_irq(client->irq, tps);
cancel_delayed_work_sync(&tps->work);
@@ -619,7 +615,7 @@ static int tps65010_probe(struct i2c_client *client)
tps, DEBUG_FOPS);
/* optionally register GPIOs */
- if (board && board->base != 0) {
+ if (board) {
tps->outmask = board->outmask;
tps->chip.label = client->name;
@@ -632,7 +628,7 @@ static int tps65010_probe(struct i2c_client *client)
/* NOTE: only partial support for inputs; nyet IRQs */
tps->chip.get = tps65010_gpio_get;
- tps->chip.base = board->base;
+ tps->chip.base = -1;
tps->chip.ngpio = 7;
tps->chip.can_sleep = 1;
@@ -641,7 +637,7 @@ static int tps65010_probe(struct i2c_client *client)
dev_err(&client->dev, "can't add gpiochip, err %d\n",
status);
else if (board->setup) {
- status = board->setup(client, board->context);
+ status = board->setup(client, &tps->chip);
if (status < 0) {
dev_dbg(&client->dev,
"board %s %s err %d\n",
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index ce78edfb402b..a14af21f12da 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_data/mmc-omap.h>
@@ -111,6 +112,9 @@ struct mmc_omap_slot {
struct mmc_request *mrq;
struct mmc_omap_host *host;
struct mmc_host *mmc;
+ struct gpio_desc *vsd;
+ struct gpio_desc *vio;
+ struct gpio_desc *cover;
struct omap_mmc_slot_data *pdata;
};
@@ -133,6 +137,7 @@ struct mmc_omap_host {
int irq;
unsigned char bus_mode;
unsigned int reg_shift;
+ struct gpio_desc *slot_switch;
struct work_struct cmd_abort_work;
unsigned abort:1;
@@ -216,8 +221,13 @@ no_claim:
if (host->current_slot != slot) {
OMAP_MMC_WRITE(host, CON, slot->saved_con & 0xFC00);
- if (host->pdata->switch_slot != NULL)
- host->pdata->switch_slot(mmc_dev(slot->mmc), slot->id);
+ if (host->slot_switch)
+ /*
+ * With two slots and a simple GPIO switch, setting
+ * the GPIO to 0 selects slot ID 0, setting it to 1
+ * selects slot ID 1.
+ */
+ gpiod_set_value(host->slot_switch, slot->id);
host->current_slot = slot;
}
@@ -297,6 +307,9 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
static inline
int mmc_omap_cover_is_open(struct mmc_omap_slot *slot)
{
+ /* If we have a GPIO then use that */
+ if (slot->cover)
+ return gpiod_get_value(slot->cover);
if (slot->pdata->get_cover_state)
return slot->pdata->get_cover_state(mmc_dev(slot->mmc),
slot->id);
@@ -1106,6 +1119,11 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
host = slot->host;
+ if (slot->vsd)
+ gpiod_set_value(slot->vsd, power_on);
+ if (slot->vio)
+ gpiod_set_value(slot->vio, power_on);
+
if (slot->pdata->set_power != NULL)
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
vdd);
@@ -1240,6 +1258,23 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
slot->power_mode = MMC_POWER_UNDEFINED;
slot->pdata = &host->pdata->slots[id];
+ /* Check for some optional GPIO controls */
+ slot->vsd = gpiod_get_index_optional(host->dev, "vsd",
+ id, GPIOD_OUT_LOW);
+ if (IS_ERR(slot->vsd))
+ return dev_err_probe(host->dev, PTR_ERR(slot->vsd),
+ "error looking up VSD GPIO\n");
+ slot->vio = gpiod_get_index_optional(host->dev, "vio",
+ id, GPIOD_OUT_LOW);
+ if (IS_ERR(slot->vio))
+ return dev_err_probe(host->dev, PTR_ERR(slot->vio),
+ "error looking up VIO GPIO\n");
+ slot->cover = gpiod_get_index_optional(host->dev, "cover",
+ id, GPIOD_IN);
+ if (IS_ERR(slot->cover))
+ return dev_err_probe(host->dev, PTR_ERR(slot->cover),
+ "error looking up cover switch GPIO\n");
+
host->slots[id] = slot;
mmc->caps = 0;
@@ -1349,6 +1384,13 @@ static int mmc_omap_probe(struct platform_device *pdev)
if (IS_ERR(host->virt_base))
return PTR_ERR(host->virt_base);
+ host->slot_switch = gpiod_get_optional(host->dev, "switch",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(host->slot_switch))
+ return dev_err_probe(host->dev, PTR_ERR(host->slot_switch),
+ "error looking up slot switch GPIO\n");
+
+
INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d162afbbe19f..ecbd3784bec3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2330,7 +2330,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
spin_lock_init(&musb->lock);
spin_lock_init(&musb->list_lock);
- musb->board_set_power = plat->set_power;
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
musb->port_mode = plat->mode;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b7588d11cfc5..91b5b6b66f96 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -352,8 +352,6 @@ struct musb {
u16 epmask;
u8 nr_endpoints;
- int (*board_set_power)(int state);
-
u8 min_power; /* vbus for periph, in mA/2 */
enum musb_mode port_mode;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index a1f29dbc62e6..cbc707fe570f 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -11,6 +11,8 @@
* interface.
*/
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -30,6 +32,8 @@ struct tusb6010_glue {
struct device *dev;
struct platform_device *musb;
struct platform_device *phy;
+ struct gpio_desc *enable;
+ struct gpio_desc *intpin;
};
static void tusb_musb_set_vbus(struct musb *musb, int is_on);
@@ -1021,16 +1025,29 @@ static void tusb_setup_cpu_interface(struct musb *musb)
static int tusb_musb_start(struct musb *musb)
{
+ struct tusb6010_glue *glue = dev_get_drvdata(musb->controller->parent);
void __iomem *tbase = musb->ctrl_base;
- int ret = 0;
unsigned long flags;
u32 reg;
+ int i;
- if (musb->board_set_power)
- ret = musb->board_set_power(1);
- if (ret != 0) {
- printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
- return ret;
+ /*
+ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+ * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+ * provide then PGOOD signal to TUSB6010 which will release it from reset.
+ */
+ gpiod_set_value(glue->enable, 1);
+ msleep(1);
+
+ /* Wait for 100ms until TUSB6010 pulls INT pin down */
+ i = 100;
+ while (i && gpiod_get_value(glue->intpin)) {
+ msleep(1);
+ i--;
+ }
+ if (!i) {
+ pr_err("tusb: Powerup respones failed\n");
+ return -ENODEV;
}
spin_lock_irqsave(&musb->lock, flags);
@@ -1083,8 +1100,8 @@ static int tusb_musb_start(struct musb *musb)
err:
spin_unlock_irqrestore(&musb->lock, flags);
- if (musb->board_set_power)
- musb->board_set_power(0);
+ gpiod_set_value(glue->enable, 0);
+ msleep(10);
return -ENODEV;
}
@@ -1158,11 +1175,13 @@ done:
static int tusb_musb_exit(struct musb *musb)
{
+ struct tusb6010_glue *glue = dev_get_drvdata(musb->controller->parent);
+
del_timer_sync(&musb->dev_timer);
the_musb = NULL;
- if (musb->board_set_power)
- musb->board_set_power(0);
+ gpiod_set_value(glue->enable, 0);
+ msleep(10);
iounmap(musb->sync_va);
@@ -1218,6 +1237,15 @@ static int tusb_probe(struct platform_device *pdev)
glue->dev = &pdev->dev;
+ glue->enable = devm_gpiod_get(glue->dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(glue->enable))
+ return dev_err_probe(glue->dev, PTR_ERR(glue->enable),
+ "could not obtain power on/off GPIO\n");
+ glue->intpin = devm_gpiod_get(glue->dev, "int", GPIOD_IN);
+ if (IS_ERR(glue->intpin))
+ return dev_err_probe(glue->dev, PTR_ERR(glue->intpin),
+ "could not obtain INT GPIO\n");
+
pdata->platform_ops = &tusb_ops;
usb_phy_generic_register();
@@ -1236,10 +1264,7 @@ static int tusb_probe(struct platform_device *pdev)
musb_resources[1].end = pdev->resource[1].end;
musb_resources[1].flags = pdev->resource[1].flags;
- musb_resources[2].name = pdev->resource[2].name;
- musb_resources[2].start = pdev->resource[2].start;
- musb_resources[2].end = pdev->resource[2].end;
- musb_resources[2].flags = pdev->resource[2].flags;
+ musb_resources[2] = DEFINE_RES_IRQ_NAMED(gpiod_to_irq(glue->intpin), "mc");
pinfo = tusb_dev_info;
pinfo.parent = &pdev->dev;
diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
index 03cff39d392d..e4a7f0b824ff 100644
--- a/drivers/video/fbdev/omap/lcd_mipid.c
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
@@ -7,6 +7,7 @@
*/
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
@@ -41,6 +42,7 @@ struct mipid_device {
when we can issue the
next sleep in/out command */
unsigned long hw_guard_wait; /* max guard time in jiffies */
+ struct gpio_desc *reset;
struct omapfb_device *fbdev;
struct spi_device *spi;
@@ -556,6 +558,12 @@ static int mipid_spi_probe(struct spi_device *spi)
return -ENOMEM;
}
+ /* This will de-assert RESET if active */
+ md->reset = gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(md->reset))
+ return dev_err_probe(&spi->dev, PTR_ERR(md->reset),
+ "no reset GPIO line\n");
+
spi->mode = SPI_MODE_0;
md->spi = spi;
dev_set_drvdata(&spi->dev, md);
@@ -574,6 +582,8 @@ static void mipid_spi_remove(struct spi_device *spi)
{
struct mipid_device *md = dev_get_drvdata(&spi->dev);
+ /* Asserts RESET */
+ gpiod_set_value(md->reset, 1);
mipid_disable(&md->panel);
kfree(md);
}
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-06 20:23:32 +0000