diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/mptcp_join.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/mptcp_join.sh | 158 |
1 files changed, 129 insertions, 29 deletions
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 108aeeb84ef1..9ea6d698e9d3 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -661,7 +661,7 @@ pm_nl_check_endpoint() done if [ -z "${id}" ]; then - test_fail "bad test - missing endpoint id" + fail_test "bad test - missing endpoint id" return fi @@ -1415,18 +1415,28 @@ chk_add_nr() local add_nr=$1 local echo_nr=$2 local port_nr=${3:-0} - local syn_nr=${4:-$port_nr} - local syn_ack_nr=${5:-$port_nr} - local ack_nr=${6:-$port_nr} - local mis_syn_nr=${7:-0} - local mis_ack_nr=${8:-0} + local ns_invert=${4:-""} + local syn_nr=$port_nr + local syn_ack_nr=$port_nr + local ack_nr=$port_nr + local mis_syn_nr=0 + local mis_ack_nr=0 + local ns_tx=$ns1 + local ns_rx=$ns2 + local extra_msg="" local count local timeout - timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout) + if [[ $ns_invert = "invert" ]]; then + ns_tx=$ns2 + ns_rx=$ns1 + extra_msg="invert" + fi + + timeout=$(ip netns exec ${ns_tx} sysctl -n net.mptcp.add_addr_timeout) print_check "add" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtAddAddr") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1438,7 +1448,7 @@ chk_add_nr() fi print_check "echo" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtEchoAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_nr" ]; then @@ -1449,7 +1459,7 @@ chk_add_nr() if [ $port_nr -gt 0 ]; then print_check "pt" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtPortAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$port_nr" ]; then @@ -1459,7 +1469,7 @@ chk_add_nr() fi print_check "syn" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1470,7 +1480,7 @@ chk_add_nr() fi print_check "synack" - count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPJoinPortSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1481,7 +1491,7 @@ chk_add_nr() fi print_check "ack" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPJoinPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1492,7 +1502,7 @@ chk_add_nr() fi print_check "syn" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_syn_nr" ]; then @@ -1503,7 +1513,7 @@ chk_add_nr() fi print_check "ack" - count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMismatchPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_ack_nr" ]; then @@ -1513,6 +1523,8 @@ chk_add_nr() print_ok fi fi + + print_info "$extra_msg" } chk_add_tx_nr() @@ -1634,6 +1646,8 @@ chk_prio_nr() { local mp_prio_nr_tx=$1 local mp_prio_nr_rx=$2 + local mpj_syn=$3 + local mpj_syn_ack=$4 local count print_check "ptx" @@ -1655,6 +1669,26 @@ chk_prio_nr() else print_ok fi + + print_check "syn backup" + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynBackupRx") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$mpj_syn" ]; then + fail_test "got $count JOIN[s] syn with Backup expected $mpj_syn" + else + print_ok + fi + + print_check "synack backup" + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckBackupRx") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$mpj_syn_ack" ]; then + fail_test "got $count JOIN[s] synack with Backup expected $mpj_syn_ack" + else + print_ok + fi } chk_subflow_nr() @@ -1955,6 +1989,21 @@ signal_address_tests() chk_add_nr 1 1 fi + # uncommon: subflow and signal flags on the same endpoint + # or because the user wrongly picked both, but still expects the client + # to create additional subflows + if reset "subflow and signal together"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 0 2 + pm_nl_add_endpoint $ns2 10.0.3.2 flags signal,subflow + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 0 invert # only initiated by ns2 + chk_add_nr 0 0 0 # none initiated by ns1 + chk_rst_nr 0 0 invert # no RST sent by the client + chk_rst_nr 0 0 # no RST sent by the server + fi + # accept and use add_addr with additional subflows if reset "multiple subflows and signal"; then pm_nl_set_limits $ns1 0 3 @@ -2612,33 +2661,46 @@ backup_tests() sflags=nobackup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 fi # single address, backup if reset "single address, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup + pm_nl_set_limits $ns2 1 1 + sflags=nobackup speed=slow \ + run_tests $ns1 $ns2 10.0.1.1 + chk_join_nr 1 1 1 + chk_add_nr 1 1 + chk_prio_nr 1 0 0 1 + fi + + # single address, switch to backup + if reset "single address, switch to backup" && + continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + pm_nl_set_limits $ns1 0 1 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal pm_nl_set_limits $ns2 1 1 sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 - chk_prio_nr 1 1 + chk_prio_nr 1 1 0 0 fi # single address with port, backup if reset "single address with port, backup" && continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then pm_nl_set_limits $ns1 0 1 - pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100 + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup port 10100 pm_nl_set_limits $ns2 1 1 - sflags=backup speed=slow \ + sflags=nobackup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1 chk_add_nr 1 1 - chk_prio_nr 1 1 + chk_prio_nr 1 0 0 1 fi if reset "mpc backup" && @@ -2647,17 +2709,26 @@ backup_tests() speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 0 1 + chk_prio_nr 0 1 0 0 fi if reset "mpc backup both sides" && continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then - pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 2 + pm_nl_add_endpoint $ns1 10.0.1.1 flags signal,backup pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup + + # 10.0.2.2 (non-backup) -> 10.0.1.1 (backup) + pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow + # 10.0.1.2 (backup) -> 10.0.2.1 (non-backup) + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + ip -net "$ns2" route add 10.0.2.1 via 10.0.1.1 dev ns2eth1 # force this path + speed=slow \ run_tests $ns1 $ns2 10.0.1.1 - chk_join_nr 0 0 0 - chk_prio_nr 1 1 + chk_join_nr 2 2 2 + chk_prio_nr 1 1 1 1 fi if reset "mpc switch to backup" && @@ -2666,7 +2737,7 @@ backup_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 0 1 + chk_prio_nr 0 1 0 0 fi if reset "mpc switch to backup both sides" && @@ -2676,7 +2747,7 @@ backup_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 0 0 0 - chk_prio_nr 1 1 + chk_prio_nr 1 1 0 0 fi } @@ -3053,7 +3124,7 @@ fullmesh_tests() addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 chk_rm_nr 0 1 fi @@ -3066,7 +3137,7 @@ fullmesh_tests() sflags=nobackup,nofullmesh speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 2 2 2 - chk_prio_nr 0 1 + chk_prio_nr 0 1 1 0 chk_rm_nr 0 1 fi } @@ -3318,7 +3389,7 @@ userspace_tests() sflags=backup speed=slow \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 0 - chk_prio_nr 0 0 + chk_prio_nr 0 0 0 0 fi # userspace pm type prevents rm_addr @@ -3526,6 +3597,35 @@ endpoint_tests() chk_mptcp_info subflows 1 subflows 1 mptcp_lib_kill_wait $tests_pid fi + + # remove and re-add + if reset "delete re-add signal" && + mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then + pm_nl_set_limits $ns1 1 1 + pm_nl_set_limits $ns2 1 1 + pm_nl_add_endpoint $ns1 10.0.2.1 id 1 flags signal + test_linkfail=4 speed=20 \ + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$! + + wait_mpj $ns2 + pm_nl_check_endpoint "creation" \ + $ns1 10.0.2.1 id 1 flags signal + chk_subflow_nr "before delete" 2 + chk_mptcp_info subflows 1 subflows 1 + + pm_nl_del_endpoint $ns1 1 10.0.2.1 + sleep 0.5 + chk_subflow_nr "after delete" 1 + chk_mptcp_info subflows 0 subflows 0 + + pm_nl_add_endpoint $ns1 10.0.2.1 flags signal + wait_mpj $ns2 + chk_subflow_nr "after re-add" 2 + chk_mptcp_info subflows 1 subflows 1 + mptcp_lib_kill_wait $tests_pid + fi + } # [$1: error message] |