| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt
controller drivers") changed xive_irq_data to be stashed to chip_data
instead of handler_data. However, multiple places are still attempting to
read xive_irq_data from handler_data and get a NULL pointer deference bug.
Update them to read xive_irq_data from chip_data.
Non-XIVE files which touch xive_irq_data seem quite strange to me,
especially the ocxl driver. I think there ought to be an alternative
platform-independent solution, instead of touching XIVE's data directly.
Therefore, I think this whole thing should be cleaned up. But perhaps I
just misunderstand something. In any case, this cleanup would not be
trivial; for now, just get things working again.
Fixes: cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers")
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/68e48df8.170a0220.4b4b0.217d@mx.google.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008081359.1382699-1-namcao@linutronix.de
|
|
pseries_msi_ops_teardown() reads pci_dev* from msi_alloc_info_t. However,
pseries_msi_ops_prepare() does not populate this structure, thus it is all
zeros. Consequently, pseries_msi_ops_teardown() triggers a NULL pointer
dereference crash.
struct pci_dev is available in struct irq_domain. Read it there instead.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/878d7651-433a-46fe-a28b-1b7e893fcbe0@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251010120307.3281720-1-namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"This contains a series I originally wrote and that Eric brought over
the finish line. It moves out the i_crypt_info and i_verity_info
pointers out of 'struct inode' and into the fs-specific part of the
inode.
So now the few filesytems that actually make use of this pay the price
in their own private inode storage instead of forcing it upon every
user of struct inode.
The pointer for the crypt and verity info is simply found by storing
an offset to its address in struct fsverity_operations and struct
fscrypt_operations. This shrinks struct inode by 16 bytes.
I hope to move a lot more out of it in the future so that struct inode
becomes really just about very core stuff that we need, much like
struct dentry and struct file, instead of the dumping ground it has
become over the years.
On top of this are a various changes associated with the ongoing inode
lifetime handling rework that multiple people are pushing forward:
- Stop accessing inode->i_count directly in f2fs and gfs2. They
simply should use the __iget() and iput() helpers
- Make the i_state flags an enum
- Rework the iput() logic
Currently, if we are the last iput, and we have the I_DIRTY_TIME
bit set, we will grab a reference on the inode again and then mark
it dirty and then redo the put. This is to make sure we delay the
time update for as long as possible
We can rework this logic to simply dec i_count if it is not 1, and
if it is do the time update while still holding the i_count
reference
Then we can replace the atomic_dec_and_lock with locking the
->i_lock and doing atomic_dec_and_test, since we did the
atomic_add_unless above
- Add an icount_read() helper and convert everyone that accesses
inode->i_count directly for this purpose to use the helper
- Expand dump_inode() to dump more information about an inode helping
in debugging
- Add some might_sleep() annotations to iput() and associated
helpers"
* tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add might_sleep() annotation to iput() and more
fs: expand dump_inode()
inode: fix whitespace issues
fs: add an icount_read helper
fs: rework iput logic
fs: make the i_state flags an enum
fs: stop accessing ->i_count directly in f2fs and gfs2
fsverity: check IS_VERITY() in fsverity_cleanup_inode()
fs: remove inode::i_verity_info
btrfs: move verity info pointer to fs-specific part of inode
f2fs: move verity info pointer to fs-specific part of inode
ext4: move verity info pointer to fs-specific part of inode
fsverity: add support for info in fs-specific part of inode
fs: remove inode::i_crypt_info
ceph: move crypt info pointer to fs-specific part of inode
ubifs: move crypt info pointer to fs-specific part of inode
f2fs: move crypt info pointer to fs-specific part of inode
ext4: move crypt info pointer to fs-specific part of inode
fscrypt: add support for info in fs-specific part of inode
fscrypt: replace raw loads of info pointer with helper function
|
|
FSL SOC Changes for 6.18:
- Use for_each_online_cpu() instead of for_each_cpu() in qbman
- Update FSL QUICC ENGINE GPIO driver to a standard platform driver
and stop using legacy-of-mm-gpiochip.h header
- Misc fixes on bus/fsl-mc
* tag 'soc_fsl-6.18-1' of https://github.com/chleroy/linux:
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
bus: fsl-mc: Replace snprintf and sprintf with sysfs_emit in sysfs show functions
bus: fsl-mc: Check return value of platform_get_resource()
Link: https://lore.kernel.org/r/26615a15-3494-435f-b0c1-861122b4b5e1@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
kern_path_locked() is now only used to prepare for removing an object
from the filesystem (and that is the only credible reason for wanting a
positive locked dentry). Thus it corresponds to kern_path_create() and
so should have a corresponding name.
Unfortunately the name "kern_path_create" is somewhat misleading as it
doesn't actually create anything. The recently added
simple_start_creating() provides a better pattern I believe. The
"start" can be matched with "end" to bracket the creating or removing.
So this patch changes names:
kern_path_locked -> start_removing_path
kern_path_create -> start_creating_path
user_path_create -> start_creating_user_path
user_path_locked_at -> start_removing_user_path_at
done_path_create -> end_creating_path
and also introduces end_removing_path() which is identical to
end_creating_path().
__start_removing_path (which was __kern_path_locked) is enhanced to
call mnt_want_write() for consistency with the start_creating_path().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
As a side effect this change fixes a potential memory leak on
an error path, if of_mm_gpiochip_add_data() fails.
[Text copied from commit 34064c8267a6 ("powerpc/8xx: Drop
legacy-of-mm-gpiochip.h header")]
Suggested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/e8a5d2c5b72233bd36da7fecc0a551ca54d39478.1758212309.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The hypervisor assigns one pipe per partition for all sources and
assigns new pipe after migration. Also the partition ID that is
used by source as its target ID may be changed after the migration.
So disable hvpipe during SUSPEND event with ‘hvpipe enable’ system
parameter value = 0 and enable it after migration during RESUME
event with hvpipe enable’ system parameter value = 1.
The user space calls such as ioctl()/ read() / write() / poll()
returns -ENXIO between SUSPEND and RESUME events. The user space
process can close FD and reestablish connection with new FD after
migration if needed (Example: source IDs are changed).
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-10-haren@linux.ibm.com
|
|
The partition uses “Hypervisor Pipe OS Enablement Notification”
system parameter token (value = 64) to enable / disable hvpipe in
the hypervisor. Once hvpipe is enabled, the hypervisor notifies
OS if the payload is pending for that partition from any source.
This system parameter token takes 1 byte length of data with
1 = Enable and 0 = Disable.
Enable hvpipe in the hypervisor with ibm,set-system-parameter
RTAS after registering hvpipe event source interrupt.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-9-haren@linux.ibm.com
|
|
The hypervisor signals the OS via a Hypervisor Pipe Event external
interrupt when data is available to be received from the pipe.
Then the OS should call RTAS check-exception and provide the input
Event Mask as defined for the ‘ibm,hvpipe-msg-events’. In response,
check-exception will return an event log containing an Pipe Events
message. This message contains the source ID for which this
message is intended to and the pipe status such as whether the
payload is pending in the hypervisor or pipe to source is closed.
If there is any user space process waiting in the wait_queue for
the payload from this source ID, wake up that process which can
issue read() to obtain payload with ibm,receive-hvpipe-msg RTAS
or close FD if the pipe to source is closed.
The hypervisor has one pipe per partition for all sources and it
will not deliver another hvpipe event message until the partition
reads the payload for the previous hvpipe event. So if the source
ID is not found in the source list, issue the dummy
ibm,receive-hvpipe-msg RTAS so that pipe will not blocked.
Register hvpipe event source interrupt based on entries from
/proc/device-tree//event-sources/ibm,hvpipe-msg-events property.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-8-haren@linux.ibm.com
|
|
The user space polls on the wait_queue for the payload from the
specific source. The hypervisor interrupts the OS when the pipe
status for the specific source is changed such as payload is
available for the partition or pipe to the source is closed. The
OS retrieves the HVPIPE event message with check-exception RTAS
and event message contains the source ID and the pipe status.
Then wakes up all FDs waiting on the wait_queue so that the user
space can read the payload or close the FD if the pipe to source
in the hypervisor is closed.
The hypervisor assigns one pipe per partition for all sources.
Hence issue ibm,receive-hvpipe-msg() to read the pending
payload during release() before closing FD so that pipe to the
partition will not be blocked.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-7-haren@linux.ibm.com
|
|
ibm,receive-hvpipe-msg RTAS call is used to receive data from the
source (Ex: Hardware Management Console) over the hypervisor
pipe. The hypervisor will signal the OS via a Hypervisor Pipe
Event external interrupt when data is available to be received
from the pipe and the event message has the source ID and the
message type such as payload or closed pipe to the specific
source. The hypervisor will not generate another interrupt for
the next payload until the partition reads the previous payload.
It means the hvpipe is blocked and will not deliver other events
for any source. The maximum data length of 4048 bytes is
supported with this RTAS call right now.
The user space uses read() to receive data from HMC which issues
ibm,receive-hvpipe-msg RTAS and the kernel returns the buffer
length (including papr_hvpipe_hdr length) to the user space for
success or RTAS failure error. If the message is regarding the
pipe closed, kernel just returns the papr_hvpipe_hdr with
flags = HVPIPE_LOST_CONNECTION and expects the user space to
close FD for the corresponding source.
ibm,receive-hvpipe-msg RTAS call passes the buffer and returns
the source ID from where this payload is received and the
payload length.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-6-haren@linux.ibm.com
|
|
ibm,send-hvpipe-msg RTAS call is used to send data to the source
(Ex: Hardware Management Console) over the hypervisor pipe. The
maximum data length of 4048 bytes is supported with this RTAS call
right now. The user space uses write() to send this payload which
invokes this RTAS. Then the write returns the buffer length
(including papr_hvpipe_hdr length) to the user space for success
or RTAS failure error.
ibm,send-hvpipe-msg call takes source ID as target and the buffer
in the form of buffer list. The buffer list format consists of
work area of size 4K to hold buffer list and number of 4K work
areas depends on buffers is as follows:
Length of Buffer List in bytes
Address of 4K buffer 1
Length of 4K buffer 1 used
...
Address of 4K buffer n
Length of 4K buffer n used
Only one buffer is used right now because of max payload size is
4048 bytes. writev() can be used in future when supported more
than one buffer.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-5-haren@linux.ibm.com
|
|
The hypervisor provides ibm,send-hvpipe-msg and
ibm,receive-hvpipe-msg RTAS calls which can be used by the
partition to communicate through an inband hypervisor channel with
different external sources such as Hardware Management Console
(HMC). The information exchanged, whether it be messages, raw or
formatted data, etc., is only known to between applications in the
OS and the source (HMC). This patch adds papr-hvpipe character
driver and provides the standard interfaces such as open / ioctl/
read / write to user space for exchanging information with HMC
using send/recevive HVPIPE RTAS functions.
PAPR (7.3.32 Hypervisor Pipe Information Exchange) defines the
HVPIPE usage:
- The hypervisor has one HVPIPE per partition for all sources.
- OS can determine this feature’s availability by detecting the
“ibm,hypervisor-pipe-capable” property in the /rtas node of the
device tree.
- Each source is represented by the source ID which is used in
send / recv HVPIPE RTAS. (Ex: source ID is the target for the
payload in send RTAS).
- Return status of ibm,send-hvpipe-msg can be considered as
delivered the payload.
- Return status of ibm,receive-hvpipe-msg can be considered as
ACK to source.
- The hypervisor generates hvpipe message event interrupt when
the partition has the payload to receive.
Provide the interfaces to the user space with /dev/papr-hvpipe
character device using the following programming model:
int devfd = open("/dev/papr-hvpipe")
int fd = ioctl(devfd, PAPR_HVPIPE_IOC_CREATE_HANDLE, &srcID);
- Restrict the user space to use the same source ID and do not
expect more than one process access with the same source.
char *buf = malloc(size);
- SIZE should be 4K and the buffer contains header and the
payload.
length = write(fd, buf, size);
- OS issues ibm,send-hvpipe-msg RTAS and returns the RTAS status
to the user space.
ret = poll(fd,...)
- The HVPIPE event message IRQ wakes up for any waiting FDs.
length = read(fd, buf, size);
- OS issues ibm,receive-hvpipe-msg to receive payload from the
hypervisor.
release(fd);
- OS issues ibm,receive-hvpipe-msg if any payload is pending so
that pipe is not blocked.
The actual implementation of these calls are added in the
next patches.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Shashank MS <shashank.gowda@in.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250909084402.1488456-4-haren@linux.ibm.com
|
|
At this point MIGRATEPAGE_SUCCESS is misnamed for all folio users,
and now that we remove MIGRATEPAGE_UNMAP, it's really the only "success"
return value that the code uses and expects.
Let's just get rid of MIGRATEPAGE_SUCCESS completely and just use "0"
for success.
Link: https://lkml.kernel.org/r/20250811143949.1117439-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com> [mm]
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> [jfs]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/c7a6d8f27fd217021dea4daad777e81a525ae460.1754903590.git.namcao@linutronix.de
|
|
Move away from the legacy MSI domain setup, switch to use
msi_create_parent_irq_domain().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/a4c2c363ac7b94fffc79d5b92086135be4c57e06.1754903590.git.namcao@linutronix.de
|
|
xive-specific data is stored in handler_data. This creates a mess, as xive
has to rely on child interrupt controller drivers to clean up this data, as
was done by 9a014f45688 ("powerpc/pseries/pci: Add a msi_free() handler to
clear XIVE data").
Instead, store xive-specific data in chip_data and untangle the child
drivers.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/83968073022a4cc211dcbd0faccd20ec05e58c3e.1754903590.git.namcao@linutronix.de
|
|
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
As a side effect this change fixes a potential memory leak on
an error path, if of_mm_gpiochip_add_data() fails.
[Text copied from commit 34064c8267a6 ("powerpc/8xx: Drop
legacy-of-mm-gpiochip.h header")]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2f8f16eac72b9ec202b6e593939b44308891a661.1755519343.git.christophe.leroy@csgroup.eu
|
|
In order to drop legacy-of-mm-gpiochip dependency, first change the
44x GPIO driver to a proper platform driver.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/29d89aa43536714b193d9710301341f838fcb5b7.1755519343.git.christophe.leroy@csgroup.eu
|
|
Remove legacy-of-mm-gpiochip.h header file. The above mentioned
file provides an OF API that's deprecated. There is no agnostic
alternatives to it and we have to open code the logic which was
hidden behind of_mm_gpiochip_add_data(). Note, most of the GPIO
drivers are using their own labeling schemas and resource retrieval
that only a few may gain of the code deduplication, so whenever
alternative is appear we can move drivers again to use that one.
As a side effect this change fixes a potential memory leak on
an error path, if of_mm_gpiochip_add_data() fails.
[text copied from commit 34064c8267a6 ("powerpc/8xx:
Drop legacy-of-mm-gpiochip.h header")]
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2662f24c539db393f11b27f0feae2dc14bb2f08f.1755518891.git.christophe.leroy@csgroup.eu
|
|
Instead of doing direct access to ->i_count, add a helper to handle
this. This will make it easier to convert i_count to a refcount later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/9bc62a84c6b9d6337781203f60837bd98fbc4a96.1756222464.git.josef@toxicpanda.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pnv_irq_domain_alloc() allocates interrupts at parent's interrupt
domain. If it fails in the progress, all allocated interrupts are
freed.
The number of successfully allocated interrupts so far is stored
"i". However, "i - 1" interrupts are freed. This is broken:
- One interrupt is not be freed
- If "i" is zero, "i - 1" wraps around
Correct the number of freed interrupts to "i".
Fixes: 0fcfe2247e75 ("powerpc/powernv/pci: Add MSI domains")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/70f8debe8688e0b467367db769b71c20146a836d.1754300646.git.namcao@linutronix.de
|
|
pseries_irq_domain_alloc() allocates interrupts at parent's interrupt
domain. If it fails in the progress, all allocated interrupts are
freed.
The number of successfully allocated interrupts so far is stored
"i". However, "i - 1" interrupts are freed. This is broken:
- One interrupt is not be freed
- If "i" is zero, "i - 1" wraps around
Correct the number of freed interrupts to 'i'.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/a980067f2b256bf716b4cd713bc1095966eed8cd.1754300646.git.namcao@linutronix.de
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembler code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This is bad since macros starting with two underscores are names
that are reserved by the C language. It can also be very confusing
for the developers when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead. So let's standardize now on the __ASSEMBLER__
macro that is provided by the compilers.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), apart from tweaking two comments manually in
arch/powerpc/include/asm/bug.h and arch/powerpc/include/asm/kasan.h
(which did not have proper underscores at the end) and fixing a
checkpatch error about spaces in arch/powerpc/include/asm/spu_csa.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250801082007.32904-3-thuth@redhat.com
|
|
There are two CONFIG_POWERPC64_CPU entries in the "CPU selection"
choice block.
I guess the intent is to display a different prompt depending on
CPU_LITTLE_ENDIAN: "Generic (POWER5 and PowerPC 970 and above)" for big
endian, and "Generic (POWER8 and above)" for little endian.
I stumbled on this tricky use case, and worked around it on Kconfig with
commit 4d46b5b623e0 ("kconfig: fix infinite loop in sym_calc_choice()").
However, I doubt that supporting multiple entries with the same symbol
in a choice block is worth the complexity - this is the only such case
in the kernel tree.
This commit merges the two entries. Once this cleanup is accepted in
the powerpc subsystem, I will proceed to refactor the Kconfig parser.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250607102005.1965409-1-masahiroy@kernel.org
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/4bc0e1ca-a523-424a-8759-59e353317fba@kernel.org/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250723062842.1831271-1-jirislaby@kernel.org
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani,
Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras,
Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas
Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao
Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh
Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar
Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois.
* tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
arch/powerpc: Remove .interp section in vmlinux
powerpc: Drop GPL boilerplate text with obsolete FSF address
powerpc: Don't use %pK through printk
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions
integrity/platform_certs: Allow loading of keys in the static key management mode
powerpc/secvar: Expose secvars relevant to the key management mode
powerpc/pseries: Correct secvar format representation for static key management
(powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer
powerpc: floppy: Add missing checks after DMA map
book3s64/radix : Optimize vmemmap start alignment
book3s64/radix : Handle error conditions properly in radix_vmemmap_populate
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits
powerpc: sysdev: use lock guard for mutex
powerpc: powernv: ocxl: use lock guard for mutex
powerpc: book3s: vas: use lock guard for mutex
powerpc: fadump: use lock guard for mutex
powerpc: rtas: use lock guard for mutex
powerpc: eeh: use lock guard for mutex
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro:
"Removing subtrees of kernel filesystems is done in quite a few places;
unfortunately, it's easy to get wrong. A number of open-coded attempts
are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with all
precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that"
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs, gadgetfs: use simple_recursive_removal()
kill binderfs_remove_file()
fuse_ctl: use simple_recursive_removal()
pstore: switch to locked_recursive_removal()
binfmt_misc: switch to locked_recursive_removal()
spufs: switch to locked_recursive_removal()
add locked_recursive_removal()
better lockdep annotations for simple_recursive_removal()
simple_recursive_removal(): saner interaction with fsnotify
|
|
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The register_one_node() function was a simple wrapper around
__register_one_node(). To simplify the code, register_one_node() has been
removed, and __register_one_node() has been renamed to
register_one_node().
Link: https://lkml.kernel.org/r/8262cd0f44eeb048a1fcd3ac8382760d7f7dea60.1748452242.git.donettom@linux.ibm.com
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The PLPKS enabled PowerVM LPAR sysfs exposes all of the secure boot
secvars irrespective of the key management mode.
The PowerVM LPAR supports static and dynamic key management for secure
boot. The key management option can be updated in the management
console. The secvars PK, trustedcadb, and moduledb can be consumed both
in the static and dynamic key management modes for the loading of signed
third-party kernel modules. However, other secvars i.e. KEK, grubdb,
grubdbx, sbat, db and dbx, which are used to verify the grub and kernel
images, are consumed only in the dynamic key management mode.
Expose only PK, trustedcadb, and moduledb in the static key management
mode.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-3-ssrish@linux.ibm.com
|
|
On a PLPKS enabled PowerVM LPAR, the secvar format property for static
key management is misrepresented as "ibm,plpks-sb-unknown", creating
reason for confusion.
Static key management mode uses fixed, built-in keys. Dynamic key
management mode allows keys to be updated in production to handle
security updates without firmware rebuilds.
Define a function named plpks_get_sb_keymgmt_mode() to retrieve the
key management mode based on the existence of the SB_VERSION property
in the firmware.
Set the secvar format property to either "ibm,plpks-sb-v<version>" or
"ibm,plpks-sb-v0" based on the key management mode, and return the
length of the secvar format property.
Co-developed-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Souradeep <soura@imap.linux.ibm.com>
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-2-ssrish@linux.ibm.com
|
|
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610142918.169540-2-fourier.thomas@gmail.com
|
|
... and fix an old deadlock on spufs_mkdir() failures to populate
subdirectory - spufs_rmdir() had always been taking lock on the
victim, so doing it while the victim is locked is a bad idea.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes: 02b98ff44a57 ("powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add")
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250531235002.239213-1-haren@linux.ibm.com
|
|
use guard(mutex) for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-6-sshegde@linux.ibm.com
|
|
use lock guards for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
This shows the use of both guard and scoped_guard
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-5-sshegde@linux.ibm.com
|
|
All these includes must have been cut & pasted. The code does not use
any tty or vt functionality at all.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com>
Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com>
Reported-by: Jonathan Greental <yonatan02greental@gmail.com>
Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com
|
