| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Pull IPMI driver fixes from Corey Minyard:
"This mostly revolves around getting the driver to behave when the IPMI
device misbehaves. Past attempts have not worked very well because I
didn't have hardware I could make do this, and AI was fairly useless
for help on this.
So I modified qemu and my test suite so I could reproduce a
misbehaving IPMI device, and with that I was able to fix the issues"
* tag 'for-linus-7.0-1' of https://github.com/cminyard/linux-ipmi:
ipmi:si: Fix check for a misbehaving BMC
ipmi:msghandler: Handle error returns from the SMI sender
ipmi:si: Don't block module unload if the BMC is messed up
ipmi:si: Use a long timeout when the BMC is misbehaving
ipmi:si: Handle waiting messages when BMC failure detected
ipmi:ls2k: Make ipmi_ls2k_platform_driver static
ipmi: ipmb: initialise event handler read bytes
ipmi: Consolidate the run to completion checking for xmit msgs lock
ipmi: Fix use-after-free and list corruption on sender error
|
|
This config option goes way back - it used to be an internal debug
option to random.c (at that point called DEBUG_RANDOM_BOOT), then was
renamed and exposed as a config option as CONFIG_WARN_UNSEEDED_RANDOM,
and then further renamed to the current CONFIG_WARN_ALL_UNSEEDED_RANDOM.
It was all done with the best of intentions: the more limited
rate-limited reports were reporting some cases, but if you wanted to see
all the gory details, you'd enable this "ALL" option.
However, it turns out - perhaps not surprisingly - that when people
don't care about and fix the first rate-limited cases, they most
certainly don't care about any others either, and so warning about all
of them isn't actually helping anything.
And the non-ratelimited reporting causes problems, where well-meaning
people enable debug options, but the excessive flood of messages that
nobody cares about will hide actual real information when things go
wrong.
I just got a kernel bug report (which had nothing to do with randomness)
where two thirds of the the truncated dmesg was just variations of
random: get_random_u32 called from __get_random_u32_below+0x10/0x70 with crng_init=0
and in the process early boot messages had been lost (in addition to
making the messages that _hadn't_ been lost harder to read).
The proper way to find these things for the hypothetical developer that
cares - if such a person exists - is almost certainly with boot time
tracing. That gives you the option to get call graphs etc too, which is
likely a requirement for fixing any problems anyway.
See Documentation/trace/boottime-trace.rst for that option.
And if we for some reason do want to re-introduce actual printing of
these things, it will need to have some uniqueness filtering rather than
this "just print it all" model.
Fixes: cc1e127bfa95 ("random: remove ratelimiting for in-kernel unseeded randomness")
Acked-by: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a race on checking the state in the sender, it needs to be
checked under a lock. But you also need a check to avoid issues with
a misbehaving BMC for run to completion mode. So leave the check at
the beginning for run to completion, and add a check under the lock
to avoid the race.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d217755 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
|
|
It used to be, until recently, that the sender operation on the low
level interfaces would not fail. That's not the case any more with
recent changes.
So check the return value from the sender operation, and propagate it
back up from there and handle the errors in all places.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d217755 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
|
|
If the BMC is in a bad state, don't bother waiting for queues messages
since there can't be any. Otherwise the unload is blocked until the
BMC is back in a good state.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d217755 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
|
|
We will be shortly removing the vm_flags_t field from vm_area_desc so we
need to update all mmap_prepare users to only use the dessc->vma_flags
field.
This patch achieves that and makes all ancillary changes required to make
this possible.
This lays the groundwork for future work to eliminate the use of
vm_flags_t in vm_area_desc altogether and more broadly throughout the
kernel.
While we're here, we take the opportunity to replace VM_REMAP_FLAGS with
VMA_REMAP_FLAGS, the vma_flags_t equivalent.
No functional changes intended.
Link: https://lkml.kernel.org/r/fb1f55323799f09fe6a36865b31550c9ec67c225.1769097829.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org> [zonefs]
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Yury Norov <ynorov@nvidia.com>
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
|
If the driver goes into HOSED state, don't reset the timeout to the
short timeout in the timeout handler.
Reported-by: Igor Raits <igor@gooddata.com>
Closes: https://lore.kernel.org/linux-acpi/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Fixes: bc3a9d217755 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
If a BMC failure is detected, the current message is returned with an
error. However, if there was a waiting message, it would not be
handled.
Add a check for the waiting message after handling the current message.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/linux-acpi/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Fixes: bc3a9d217755 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever.
Fixes: be4000bc4644 ("hwrng: create filler thread")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Lianjie Wang <karin0.zst@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the TEE implementor ID match by returning the boolean
expression directly instead of going through an if/else.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
No need for it to be global.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601170753.3zDBerGP-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
IPMB doesn't use i2c reads, but the handler needs to set a value.
Otherwise an i2c read will return an uninitialised value from the bus
driver.
Fixes: 63c4eb347164 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Message-ID: <20260113-ipmb-read-init-v1-1-a9cbce7b94e3@codeconstruct.com.au>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
It made things hard to read, move the check to a function.
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
|
|
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak.
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/lkml/20260127-ipmi-v1-0-ba5cc90f516f@debian.org/
Fixes: 9cf93a8fa9513 ("ipmi: Allow an SMI sender to return an error")
Cc: stable@vger.kernel.org # 4.18
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: bf38b8710892 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: aad628c1d91a ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-10-bigeasy@linutronix.de
|
|
Airoha uses RAW mode to collect noise from the TRNG. These appear to
be unprocessed oscillations from the tero loop. For this reason, they
do not have a perfect distribution and entropy. Simple noise compression
reduces its size by 9%, so setting the quality to 900 seems reasonable.
The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha*
-rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha
-rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zip
FIPS test results:
$ cat random_airoha | rngtest -c 10000
rngtest 2.6
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microseconds
In general, these data look like real noise, but with lower entropy
than expected.
Fixes: e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modify comments in fifo_icap.c to prevent all kernel-doc warnings:
Warning: fifo_icap.c:51 This comment starts with '/**', but isn't a
kernel-doc comment.
* HwIcap Device Interrupt Status/Enable Registers
Warning: fifo_icap.c:106 No description found for return value
of 'fifo_icap_fifo_read'
Warning: fifo_icap.c:160 No description found for return value
of 'fifo_icap_get_status'
Warning: fifo_icap.c:171 No description found for return value
of 'fifo_icap_busy'
Warning: fifo_icap.c:184 No description found for return value
of 'fifo_icap_write_fifo_vacancy'
Warning: fifo_icap.c:196 No description found for return value
of 'fifo_icap_read_fifo_occupancy'
Warning: fifo_icap.c:207 bad line:
Warning: fifo_icap.c:214 No description found for return value
of 'fifo_icap_set_configuration'
Warning: fifo_icap.c:290 function parameter 'frame_buffer' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 function parameter 'num_words' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 No description found for return value
of 'fifo_icap_get_configuration'
Warning: fifo_icap.c:357 expecting prototype for buffer_icap_reset().
Prototype was for fifo_icap_reset() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251214191750.2173225-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-33-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Recently ftpm_tee_probe() and ftpm_tee_remove() grew a suffix in their
function name but I failed to adapt the kernel doc when doing so. This
change aligns the kernel doc to the actual function name (again).
Fixes: 92fad96aea24 ("tpm/tpm_ftpm_tee: Make use of tee bus methods")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601132105.9lgSsC4U-lkp@intel.com/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The data buffer in struct virtrng_info is used for DMA_FROM_DEVICE via
virtqueue_add_inbuf() and shares cachelines with the adjacent
CPU-written fields (data_avail, data_idx).
The device writing to the DMA buffer and the CPU writing to adjacent
fields could corrupt each other's data on non-cache-coherent platforms.
Add __dma_from_device_group_begin()/end() annotations to place these
in distinct cache lines.
Message-ID: <157a63b6324d1f1307ddd4faa3b62a8b90a79423.1767601130.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The tee bus got dedicated callbacks for probe and remove.
Make use of these. This fixes a runtime warning about the driver needing
to be converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
tee_client_driver_register() is typed more strongly and cares about
assigning the driver's bus. Similar for tee_client_driver_unregister().
Make use of these functions.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The tee bus got dedicated callbacks for probe and remove.
Make use of these. This fixes a runtime warning about the driver needing
to be converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Reduce boilerplate by using the newly introduced module_tee_client_driver().
That takes care of assigning the driver's bus, so the explicit assigning
in this driver can be dropped.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
filp_open() never returns NULL, it returns either a valid pointer or an
error pointer. Using IS_ERR_OR_NULL() is unnecessary. Additionally, if
filp were NULL, PTR_ERR(NULL) would return 0, leading to a misleading
error message.
Fixes: 74d8361be344 ("char: misc: add test cases")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506132058.thWZHlrb-lkp@intel.com/
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20251226230248.113073-1-alperyasinak1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When I tried to clean up the driver a bit, Arnd noted:
> According to thinkwiki.de, the 3780i modem was only used in a
> couple of Thinkpad models that are now over 25 years old, using
> Pentium II processors, and they all have a physical RS232 port
> that can be used to connect an external modem instead.
>
> Maybe we can just retire this driver?
So instead of the clean up, drop the driver altogether.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/b8834e5d-fdde-4b1a-8757-288dddc507a9@app.fastmail.com/
Link: https://patch.msgid.link/20251124103952.995229-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Pull IPMI updates from Corey Minyard:
"Minor IPMI fixes:
- Some device tree cleanups and a maintainer add
- Fix a race when handling channel updates that could result in
errors being reported to the user in some cases"
* tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: Add entry on Loongson-2K IPMI driver
dt-bindings: ipmi: Convert aspeed,ast2400-ibt-bmc to DT schema
dt-bindings: ipmi: Convert nuvoton,npcm750-kcs-bmc to DT schema
ipmi: Skip channel scan if channels are already marked ready
ipmi: Fix __scan_channels() failing to rescan channels
ipmi: Fix the race between __scan_channels() and deliver_response()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull more tpm updates from Jarkko Sakkinen:
"This is targeted for tpm2-sessions updates.
There's two bug fixes and two more cosmetic tweaks for HMAC protected
sessions. They provide a baseine for further improvements to be
implemented during the the course of the release cycle"
* tag 'tpmdd-sessions-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm2-sessions: Open code tpm_buf_append_hmac_session()
tpm2-sessions: Remove 'attributes' parameter from tpm_buf_append_auth
tpm2-sessions: Fix tpm2_read_public range checks
tpm2-sessions: Fix out of range indexing in name_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
Open code 'tpm_buf_append_hmac_session_opt' to the call site, as it only
masks a call sequence and does otherwise nothing particularly useful.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
Remove 'attributes' parameter from 'tpm_buf_append_auth', as it is not used
by the function.
Fixes: 27184f8905ba ("tpm: Opt-in in disable PCR integrity protection")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains changes to unify TPM return code translation between
trusted_tpm2 and TPM driver itself. Other than that the changes are
either bug fixes or minor imrovements"
* tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2
tpm: Use -EPERM as fallback error code in tpm_ret_to_err
tpm: Cap the number of PCR banks
tpm: Remove tpm_find_get_ops
tpm: add WQ_PERCPU to alloc_workqueue users
tpm_crb: add missing loc parameter to kerneldoc
tpm_crb: Fix a spelling mistake
selftests: tpm2: Fix ill defined assertions
|
