summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-ids.h
AgeCommit message (Collapse)AuthorLines
2026-05-12HID: i2c-hid: add reset quirk for BLTP7853 touchpadXu Rao-0/+3
The BLTP7853 I2C HID touchpad may fail to probe after reboot or reprobe because reset completion is not signalled to the host. The driver then waits for the reset-complete interrupt until it times out and the device probe fails: i2c_hid i2c-BLTP7853:00: failed to reset device. i2c_hid i2c-BLTP7853:00: can't add hid device: -61 i2c_hid: probe of i2c-BLTP7853:00 failed with error -61 Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for the device so i2c-hid does not wait for a reset interrupt that may never arrive. Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-04-28HID: elan: Add support for ELAN SB974D touchpadDamien Dejean-0/+1
Elan SB974D touchpad uses ELAN_MT_I2C format to send HID reports. Add an entry to match for the device and parse its vendor specific format. Signed-off-by: Damien Dejean <damiendejean@google.com> Signed-off-by: Kornel Dulęba <korneld@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-04-16Merge branch 'for-7.1/lenovo-v2' into for-linusJiri Kosina-0/+7
- new driver for Lenovo Legion Go / S devices (Derek J. Clark)
2026-04-16Merge branch 'for-7.1/sony' into for-linusJiri Kosina-2/+24
- new support for a variety of Rock Band and DJ Hero Turntable devices (Rosalie Wanders)
2026-04-09HID: huawei: fix CD30 keyboard report descriptor issueMiao Li-0/+3
When the Huawei CD30 USB keyboard undergoes 500 reboot cycles, initialization may fail due to a report descriptor problem. The error log is as follows: [pid:175,cpu0,kworker/0:1,6]usb 1-1.2.2: new low-speed USB device number 6 using xhci-hcd [pid:175,cpu0,kworker/0:1,9]usb 1-1.2.2: New USB device found, idVendor=12d1, idProduct=109b, bcdDevice= 1.03 [pid:175,cpu0,kworker/0:1,0]usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [pid:175,cpu0,kworker/0:1,1]usb 1-1.2.2: Product: HUAWEI USB Wired Keyboard [pid:175,cpu0,kworker/0:1,2]usb 1-1.2.2: Manufacturer: HUAWEI [pid:175,cpu0,kworker/0:1,4]input: HUAWEI HUAWEI USB Wired Keyboard as /devices/platform/efc00000.hisi_usb/efc00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:12D1:109B.0002/input/input6 [pid:175,cpu0,kworker/0:1,5]hid-generic 0003:12D1:109B.0002: input,hidraw1: USB HID v1.10 Keyboard [HUAWEI HUAWEI USB Wired Keyboard] on usb-xhci-hcd.1.auto-1.2.2/input0 [pid:175,cpu0,kworker/0:1,9]hid-generic 0003:12D1:109B.0003: collection stack underflow [pid:175,cpu0,kworker/0:1,0]hid-generic 0003:12D1:109B.0003: item 0 0 0 12 parsing failed [pid:175,cpu0,kworker/0:1,1]hid-generic: probe of 0003:12D1:109B.0003 failed with error -22 ... When encountering such a situation, fix it with the correct report descriptor. Signed-off-by: Miao Li <limiao@kylinos.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-04-09HID: sony: add support for more instrumentsRosalie Wanders-2/+24
This patch adds support for the following instruments: * Rock Band 1/2/3 Wii/PS3 instruments * Rock Band 3 PS3 Pro instruments * DJ Hero Turntable Wii and PS3 instruments are the same besides the vendor and product ID. This patch also fixes the mappings for the existing Guitar Hero instruments. Co-developed-by: Sanjay Govind <sanjay.govind9@gmail.com> Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Co-developed-by: Brenton Simpson <appsforartists@google.com> Signed-off-by: Brenton Simpson <appsforartists@google.com> Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-27HID: Kysona: Add support for VXE Dragonfly R1 ProLode Willems-0/+4
Apparently this same protocol is used by more mice from different brands. This patch adds support for the VXE Dragonfly R1 Pro. Tested-by: Dominykas Svetikas <dominykas@svetikas.lt> Signed-off-by: Lode Willems <me@lodewillems.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-27HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3leo vriska-0/+3
According to a mailing list report [1], this controller's predecessor has the same issue. However, it uses the xpad driver instead of HID, so this quirk wouldn't apply. [1]: https://lore.kernel.org/linux-input/unufo3$det$1@ciao.gmane.io/ Signed-off-by: leo vriska <leo@60228.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-11HID: input: Drop Asus UX550* touchscreen ignore battery quirksHans de Goede-2/+0
Drop the Asus UX550* touchscreen ignore battery quirks, there is a blanket HID_BATTERY_QUIRK_IGNORE for all USB_VENDOR_ID_ELAN USB touchscreens now, so these are just a duplicate of those. Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-10HID: asus: add xg mobile 2022 external hardware supportDenis Benato-0/+1
XG mobile station 2022 has a different PID than the 2023 model: add it that model to hid-asus. Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-10HID: hid-lenovo-go-s: Add Lenovo Legion Go S Series HID DriverDerek J. Clark-0/+4
Adds initial framework for a new HID driver, hid-lenovo-go-s, along with a uevent to report the firmware version for the MCU. This driver primarily provides access to the configurable settings of the Lenovo Legion Go S controller. It will attach if the controller is in xinput or dinput mode. Non-configuration raw reports are forwarded to ensure the other endpoints continue to function as normal. Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Ethan Tidmore <ethantidmore06@gmail.com> Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com> Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-03-10HID: hid-lenovo-go: Add Lenovo Legion Go Series HID DriverDerek J. Clark-0/+3
Adds initial framework for a new HID driver, hid-lenovo-go, along with attributes that report the firmware and hardware version for each component of the HID device, of which there are 4 parts: The MCU, the transmission dongle, the left "handle" controller half, and the right "handle" controller half. Each of these devices are provided an attribute group to contain its device specific attributes. Additionally, the touchpad device attributes are logically separated from the other components in another attribute group. This driver primarily provides access to the configurable settings of the Lenovo Legion Go and Lenovo Legion Go 2 controllers running the latest firmware. As previously noted, the Legion Go controllers recently had a firmware update[1] which switched from the original "SepentiaUSB" protocol to a brand new protocol for the Go 2, primarily to ensure backwards and forwards compatibility between the Go and Go 2 devices. As part of that update the PIDs for the controllers were changed, so there is no risk of this driver attaching to controller firmware that it doesn't support. -- v6: - Make attributes static. - Use NULL instead of 0 in mcu_propery_out when there is no data. v5: - Make version attributes static, retrieve them using delayed work during probe. - Fix endianness of version strings and print as hex. v3: - Add hid-lenovo.c and Mark Pearson to LENOVO HID DRIVERS entry in MAINTAINERS Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-02-27HID: asus: add xg mobile 2023 external hardware supportDenis Benato-0/+1
XG mobile stations have the 0x5a endpoint and has to be initialized: add them to hid-asus. Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-02-09Merge branch 'for-6.20/elecom' into for-linusJiri Kosina-0/+3
- support for new model of "Elecom Huge" trackball (David Phillips)
2026-02-09Merge branch 'for-6.20/sony' into for-linusJiri Kosina-0/+14
- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)
2026-02-04HID: sony: add dongle device IDs for CRKD Gibson SGRosalie Wanders-1/+3
This patch adds the dongle device IDs for the CRKD Gibson SG Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-23HID: multitouch: add eGalaxTouch EXC3188 supportThorsten Schmelzer-0/+1
Add support for the for the EXC3188 touchscreen from eGalaxy. Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-23HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBKDavid Phillips-0/+3
New model in the ELECOM HUGE trackball line that has 8 buttons but the report descriptor specifies only 5. The HUGE Plus supports connecting via Bluetooth, 2.4GHz wireless USB dongle, and directly via a USB-C cable. Each connection type reports a different device id, 01AA for cable, 01AB for USB dongle, and 01AC for Bluetooth. This patch adds these device IDs and applies the fixups similar to the other ELECOM devices to get all 8 buttons working for all 3 connection types. For reference, the usbhid-dump output: 001:013:001:DESCRIPTOR 1769085639.598405 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 05 15 00 25 01 75 01 95 05 81 02 75 03 95 01 81 01 05 01 09 30 09 31 16 01 80 26 FF 7F 75 10 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 05 0C 0A 38 02 15 81 25 7F 75 08 95 01 81 06 C0 C0 05 0C 09 01 A1 01 85 02 15 01 26 8C 02 19 01 2A 8C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 09 82 09 81 09 83 15 00 25 01 19 01 29 03 75 01 95 03 81 02 95 05 81 01 C0 06 01 FF 09 00 A1 01 85 08 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: David Phillips <david@profile.sh> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-12HID: sony: add support for bluetooth Rock Band 4 PS4 guitarsRosalie Wanders-4/+8
This commit adds support for the PDP Jaguar and MadCatz Stratocaster. Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-10HID: sony: add support for Rock Band 4 PS4 and PS5 guitarsRosalie Wanders-0/+8
This commit adds support for the PDP RiffMaster and the CRKD Gibson SG in both their PS4 and PS5 modes. These devices aren't mapped correctly without these changes, they also lack support for their whammy and tilt functionality which this patch adds support for by binding them to the left and right triggers. Signed-off-by: Rosalie Wanders <rosalie@mailbox.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-10HID: multitouch: add quirks for Lenovo Yoga Book 9iBrian Howard-0/+1
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite USB device providing both touch and tablet interfaces for both screens. All inputs report through a single device, differentiated solely by report numbers. As there is no way for udev to differentiate the inputs based on USB vendor/product ID or interface numbers, custom naming is required to match against for downstream configuration. A firmware bug also results in an erroneous InRange message report being received after the stylus leaves proximity, blocking later touch events. Add required quirks for Gen 8 to Gen 10 models, including a new quirk providing for custom input device naming and dropping erroneous InRange reports. Signed-off-by: Brian Howard <blhoward2@gmail.com> Tested-by: Brian Howard <blhoward2@gmail.com> Tested-by: Kris Fredrick <linux.baguette800@slmail.me> Reported-by: Andrei Shumailov <gentoo1993@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386 Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-10HID: rapoo: Add support for side buttons on RAPOO 0x2015 mouseNguyen Dinh Dang Duong-0/+3
This patch adds support for handling the side buttons on the RAPOO 0x2015 wireless mouse. These buttons were previously not generating input events due to missing driver logic. The new code handles raw HID input report with Report ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD using the input subsystem. Tested on a RAPOO mouse with USB ID 24AE:2015. Signed-off-by: Nguyen Dinh Dang Duong <dangduong31205@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-07HID: Elecom: Add support for ELECOM M-XT3DRBK (018C)Arnoud Willemsen-1/+2
Wireless/new version of the Elecom trackball mouse M-XT3DRBK has a product id that differs from the existing M-XT3DRBK. The report descriptor format also seems to have changed and matches other (newer?) models instead (except for six buttons instead of eight). This patch follows the same format as the patch for the M-XT3URBK (018F) by Naoki Ueki (Nov 3rd 2025) to enable the sixth mouse button. dmesg output: [ 292.074664] usb 1-2: new full-speed USB device number 7 using xhci_hcd [ 292.218667] usb 1-2: New USB device found, idVendor=056e, idProduct=018c, bcdDevice= 1.00 [ 292.218676] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 292.218679] usb 1-2: Product: ELECOM TrackBall Mouse [ 292.218681] usb 1-2: Manufacturer: ELECOM usbhid-dump output: 001:006:000:DESCRIPTOR 1765072638.050578 05 01 09 02 A1 01 09 01 A1 00 85 01 05 09 19 01 29 05 15 00 25 01 95 08 75 01 81 02 95 01 75 00 81 01 05 01 09 30 09 31 16 00 80 26 FF 7F 75 10 95 02 81 06 C0 A1 00 05 01 09 38 15 81 25 7F 75 08 95 01 81 06 C0 A1 00 05 0C 0A 38 02 95 01 75 08 15 81 25 7F 81 06 C0 C0 06 01 FF 09 00 A1 01 85 02 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 05 0C 09 01 A1 01 85 05 15 00 26 3C 02 19 00 2A 3C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 19 81 29 83 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 C0 06 BC FF 09 88 A1 01 85 04 95 01 75 08 15 00 26 FF 00 19 00 2A FF 00 81 00 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: Arnoud Willemsen <mail@lynthium.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-07HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101)Rodrigo Lugathe da Conceição Alves-0/+3
The USB speaker has a bug that causes it to reboot when changing the brightness using the physical knob. Add a new vendor and product ID entry in hid-ids.h, and register the corresponding device in hid-quirks.c with the required quirk. Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com> Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2026-01-07HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_listChris Chiu-0/+1
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882 reports a HID sensor interface that is not actually implemented. Add the device to the HID ignore list so the bogus sensor is never exposed to userspace. Then the system won't hang when runtime PM tries to wake the unresponsive device. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-12-02Merge branch 'for-6.19/logitech' into for-linusJiri Kosina-0/+3
- Support for Logitech G Pro X Superlight 2 receiver (Nathan Rossi) - Fix for retry logic in hidpp_send_message_sync() (Mavroudis Chatzilazaridis) - Support for new Lighspeed receiver version (Mavroudis Chatzilazaridis) - Support for Logitech G13 (Leo L. Schwab) - Backlight support improvement for Logitech G510 (Hans de Goede)
2025-12-02Merge branch 'for-6.19/uclogic' into for-linusJiri Kosina-0/+1
- support for UcLogic XP-PEN Artist 24 Pro (Joshua Goins)
2025-11-26HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226fTerry Junge-0/+1
The mouse portion of the device's Report Descriptor declares 5 buttons but only declares 3 usages (Button 1 through Button 3). As a result events for the 2 side buttons are not generated. Detect and repair the Report Descriptor if necessary by changing the Usage Maximum value from Button 3 to Button 5. [jkosina@suse.com: standardize changelog a little bit] Reported-by: Artem <temabiill@gmail.com> Closes: https://lore.kernel.org/all/CADYkRmrfhRf6VmQjc+su+mepyv=TsHc+aMcL6ryRZ5HTZ8pyFg@mail.gmail.com/ Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Tested-by: Artem <temabiill@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-11-26HID: logitech-dj: Add support for G Pro X Superlight 2 receiverNathan Rossi-0/+1
The Logitech G Pro X Superlight 2 has a lightspeed receiver with a product id of 0xc54d, this receiver behaves like the receiver used in the original Logitech G Pro X Superlight (id 0xc547) including the 13 byte mouse reports. This change adds a definition for this receiver id, and a mapping for the recvr_type_gaming_hidpp_ls_1_3 type. With this change in place the receiver now reports the battery status of the connected mouse over wireless as well as exposing the HID interface needed for userspace to perform additional configuration with libratbag/Piper. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-11-18HID: elecom: Add support for ELECOM M-XT3URBK (018F)Naoki Ueki-1/+2
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which shares the same report descriptor as the existing device (0x00FB). However, the driver does not currently recognize this new ID, resulting in only five buttons being functional. This patch adds the new device ID so that all six buttons work properly. Signed-off-by: Naoki Ueki <naoki25519@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-30HID: lenovo: fixup Lenovo Yoga Slim 7x Keyboard rdescLauri Tirkkonen-0/+1
The keyboard of this device has the following in its report description for Usage (Keyboard) in Collection (Application): # 0x15, 0x00, // Logical Minimum (0) 52 # 0x25, 0x65, // Logical Maximum (101) 54 # 0x05, 0x07, // Usage Page (Keyboard) 56 # 0x19, 0x00, // Usage Minimum (0) 58 # 0x29, 0xdd, // Usage Maximum (221) 60 # 0x81, 0x00, // Input (Data,Arr,Abs) 62 Since the Usage Min/Max range exceeds the Logical Min/Max range, keypresses outside the Logical range are not recognized. This includes, for example, the Japanese language keyboard variant's keys for |, _ and \. Fixup the report description to make the Logical range match the Usage range, fixing the interpretation of keypresses above 101 on this device. Signed-off-by: Lauri Tirkkonen <lauri@hacktheplanet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-30HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155Zhang Heng-2/+2
Based on available evidence, the USB ID 4c4a:4155 used by multiple devices has been attributed to Jieli. The commit 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen functionality. Added checks for manufacturer and serial number to maintain microphone compatibility, enabling both devices to function properly. [jkosina@suse.com: edit shortlog] Fixes: 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") Cc: stable@vger.kernel.org Tested-by: staffan.melin@oscillator.se Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Signed-off-by: Zhang Heng <zhangheng@kylinos.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: uclogic: Add support for the XP-PEN Artist 24 ProJoshua Goins-0/+1
The tablet is similar to the 22R Pro, but with a few annoying differences. Its descriptors are bigger because of the tablet's split coordinate system, I guess it's just that large. Thankfully, this is easy enough to support as all we have to do is shift bytes around. To help code re-use, I changed the signature of uclogic_params_init_ugee_xppen_pro to accept a pen descriptor so we didn't create yet-another initialization function. I have been testing this locally for a month or so and it works great, and also corroborated this with a few other testers. Since this touches my 22R Pro code, I have tested and checked that it didn't regress that device. Signed-off-by: Joshua Goins <josh@redstrate.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: logitech-dj: Add support for a new lightspeed receiver iterationMavroudis Chatzilazaridis-0/+1
This lightspeed receiver uses 13 byte mouse reports without an ID. There are 5 additional vendor defined bytes appended to the report. The workaround for such cases has been adjusted to handle these larger reports. The keyboard reports have a distinct layout with differing minimums and maximums. Additionally, the LED reports now require a report ID of 1. New keyboard and mouse descriptors have been added to reflect these changes. The devices attached to this receiver now report the status of their battery in wireless mode, libratbag communicates with them and they can be configured with Piper. Fixes: 9d1bd9346241 ("HID: logitech-dj: Add support for a new lightspeed receiver iteration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094 Co-developed-by: Filipe Laíns <lains@riseup.net> Signed-off-by: Filipe Laíns <lains@riseup.net> Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com> Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheelOleg Makarenko-0/+1
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick. This device reboots itself every 8-10 seconds if it is not polled. Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: quirks: avoid Cooler Master MM712 dongle wakeup bugTristan Lobb-0/+3
The Cooler Master Mice Dongle includes a vendor defined HID interface alongside its mouse interface. Not polling it will cause the mouse to stop responding to polls on any interface once woken up again after going into power saving mode. Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and the Dongle's PID. Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-10-14HID: lg-g15 - Add support for Logitech G13.Leo L. Schwab-0/+1
The Logitech G13 is a gaming keypad with general-purpose macro keys, four LED-backlit macro preset keys, five "menu" keys, backlight toggle key, an analog thumbstick, RGB LED backlight, and a monochrome LCD display. Support input event generation for all keys and the thumbstick, and expose all LEDs. Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-09-30Merge branch 'for-6.18/steelseries' into for-linusBenjamin Tissoires-0/+2
- Make use of devm API for steelseries (Jeongjun Park)
2025-09-12HID: asus: add Z13 folio to generic group for multitouch to workAntheas Kapenekakis-1/+1
The Asus Z13 folio has a multitouch touchpad that needs to bind to the hid-multitouch driver in order to work properly. So bind it to the HID_GROUP_GENERIC group to release the touchpad and move it to the bottom so that the comment applies to it. While at it, change the generic KEYBOARD3 name to Z13_FOLIO. Reviewed-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-08-26HID: quirks: add support for Legion Go dual dinput modesAntheas Kapenekakis-0/+2
The Legion Go features detachable controllers which support a dual dinput mode. In this mode, the controllers appear under a single HID device with two applications. Currently, both controllers appear under the same event device, causing their controls to be mixed up. This patch separates the two so that they can be used independently. In addition, the latest firmware update for the Legion Go swaps the IDs to the ones used by the Legion Go 2, so add those IDs as well. [jkosina@suse.com: improved shortlog] Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-08-26HID: elecom: add support for ELECOM M-DT2DRBKMartin Hilgendorf-0/+1
The DT2DRBK trackball has 8 buttons, but the report descriptor only specifies 5. This patch adds the device ID and performs a similar fixup as for other ELECOM devices to enable the remaining 3 buttons. Signed-off-by: Martin Hilgendorf <martin.hilgendorf@posteo.de> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-08-20HID: logitech: Add ids for G PRO 2 LIGHTSPEEDMatt Coffin-0/+1
Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver or directly. This nano receiver appears to work identically to the 1_1 receiver for the case I've verified, which is the battery status through lg-hidpp. The same appears to be the case wired, sharing much with the Pro X Superlight 2; differences seemed to lie in userland configuration rather than in interfaces used by hid_logitech_hidpp on the kernel side. I verified the sysfs interface for battery charge/discharge status, and capacity read to be working on my 910-007290 device (white). Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-08-12HID: steelseries: refactor probe() and remove()Jeongjun Park-0/+2
steelseries_srws1_probe() still does not use devm_kzalloc() and devm_led_classdev_register(), so there is a lot of code to safely manage heap, which reduces readability and may cause memory leaks due to minor patch mistakes in the future. Therefore, it should be changed to use devm_kzalloc() and devm_led_classdev_register() to easily and safely manage heap. Also, the current steelseries driver mainly checks sd->quriks to determine which product a specific HID device is, which is not the correct way. remove(), unlike probe(), does not receive struct hid_device_id as an argument, so it must check hdev unconditionally to know which product it is. However, since struct steelseries_device and struct steelseries_srws1_data have different structures, if SRWS1 is removed in remove(), converts hdev->dev, which is initialized to struct steelseries_srws1_data, to struct steelseries_device and uses it. This causes various memory-related bugs as completely unexpected values exist in member variables of the structure. Therefore, in order to modify probe() and remove() to work properly, Arctis 1, 9 should be added to HID_USB_DEVICE and some functions should be modified to check hdev->product when determining HID device product. Fixes: a0c76896c3fb ("HID: steelseries: Add support for Arctis 1 XBox") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-07-31Merge branch 'for-6.17/uclogic' into for-linusJiri Kosina-0/+1
- support for XP-PEN Artist 22R Pro (Joshua Goins)
2025-07-31Merge branch 'for-6.17/pidff' into for-linusJiri Kosina-1/+1
- bunch of checkpatch fixes for hid-pidff (Tomasz Pakuła)
2025-07-31Merge branch 'for-6.17/apple' into for-linusJiri Kosina-12/+15
- fix for potential NULL pointer dereference in hid-apple that could be caused by malicious device with APPLE_MAGIC_BACKLIGHT quirk present triggering overflow in data field (Qasim Ijaz) - third party trackpart support for MacBookPro15,1 (Aditya Garg) - Apple Magic Keyboard A311[89] USB-C support (Aditya Garg, Grigorii Sokolik)
2025-07-03HID: elecom: add support for ELECOM HUGE 019B variantLeonard Dizon-1/+2
The ELECOM M-HT1DRBK trackball has an additional device ID (056E:019B) not yet recognized by the driver, despite using the same report descriptor as earlier variants. This patch adds the new ID and applies the same fixups, enabling all 8 buttons to function properly. Signed-off-by: Leonard Dizon <leonard@snekbyte.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-07-03HID: uclogic: Add support for XP-PEN Artist 22R ProJoshua Goins-0/+1
Adds support for the XP-PEN Artist 22R Pro, including stylus, tablet frame and pen pressure. The tablet has 20 buttons, but need to be remapped in order since the device reports invalid keycodes. Existing tablet functionality should not be inhibited, as BTN0-8 is still used. New initialization functions are added since the device differs slightly from other UGEE v2 devices. Signed-off-by: Joshua Goins <josh@redstrate.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-06-20HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2Akira Inoue-0/+1
Add "Thinkpad X1 Tablet Gen 2 Keyboard" PID to hid-lenovo driver to fix trackpoint not working issue. Signed-off-by: Akira Inoue <niyarium@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-06-10HID: Add IGNORE quirk for SMARTLINKTECHNOLOGYZhang Heng-0/+3
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng <zhangheng@kylinos.cn> Signed-off-by: Jiri Kosina <jkosina@suse.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-27 00:46:26 +0000