| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Currently, the define_read!() and define_write!() I/O macros are crate
public. The only user outside of the I/O module is PCI (for the
configurations space I/O backend). Consequently, when CONFIG_PCI=n this
causes a compile time warning [1].
In order to fix this, rename the macros to io_define_read!() and
io_define_write!() and use #[macro_export] to export them.
This is better than making the crate public visibility conditional, as
eventually subsystems will have their own crate.
Also, I/O backends are valid to be implemented by drivers as well. For
instance, there are devices (such as GPUs) that run firmware which
allows to program other devices only accessible through the primary
device through indirect I/O.
Since the macros are now public, also add the corresponding
documentation.
Fixes: 121d87b28e1d ("rust: io: separate generic I/O helpers from MMIO implementation")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Closes: https://lore.kernel.org/driver-core/CANiq72khOYkt6t5zwMvSiyZvWWHMZuNCMERXu=7K=_5tT-8Pgg@mail.gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260216131534.65008-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
`MIN_SIZE` and `io_addr_assert` are only ever used for IO types which
implement `IoKnownSize` and do not make sense for types that don't.
It looks like they should have been there since the beginning, so move
them while the code is still fresh.
Also update `IoKnownSize`'s documentation since it is not just a marker
trait anymore.
Fixes: 121d87b28e1d ("rust: io: separate generic I/O helpers from MMIO implementation")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260130-io-min-size-v1-1-65a546e3104d@nvidia.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This is now handled by the macro itself.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260123175854.176735-2-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Drivers might need to access PCI config space for querying capability
structures and access the registers inside the structures.
For Rust drivers need to access PCI config space, the Rust PCI abstraction
needs to support it in a way that upholds Rust's safety principles.
Introduce a `ConfigSpace` wrapper in Rust PCI abstraction to provide safe
accessors for PCI config space. The new type implements the `Io` trait and
`IoCapable<T>` for u8, u16, and u32 to share offset validation and
bound-checking logic with other I/O backends.
The `ConfigSpace` type uses marker types (`Normal` and `Extended`) to
represent configuration space sizes at the type level.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/all/DFV4IJDQC2J6.1Q91JOAL6CJSG@kernel.org/ [1]
Link: https://patch.msgid.link/20260121202212.4438-5-zhiw@nvidia.com
[ Applied the diff from [1], considering subsequent comment; remove
#[expect(unused)] from define_{read,write}!(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The previous Io<SIZE> type combined both the generic I/O access helpers
and MMIO implementation details in a single struct. This coupling prevented
reusing the I/O helpers for other backends, such as PCI configuration
space.
Establish a clean separation between the I/O interface and concrete
backends by separating generic I/O helpers from MMIO implementation.
Introduce a new trait hierarchy to handle different access capabilities:
- IoCapable<T>: A marker trait indicating that a backend supports I/O
operations of a certain type (u8, u16, u32, or u64).
- Io trait: Defines fallible (try_read8, try_write8, etc.) and infallibile
(read8, write8, etc.) I/O methods with runtime bounds checking and
compile-time bounds checking.
- IoKnownSize trait: The marker trait for types support infallible I/O
methods.
Move the MMIO-specific logic into a dedicated Mmio<SIZE> type that
implements the Io traits. Rename IoRaw to MmioRaw and update consumers to
use the new types.
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260121202212.4438-3-zhiw@nvidia.com
[ Add #[expect(unused)] to define_{read,write}!(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Fix a typo in the doc-comment of the Bar structure: 'inststance ->
instance'.
Add also 'is' to the comment inside Bar's `new()` function (suggested
by Dirk):
// `pdev` is valid by the invariants of `Device`.
Fixes: bf9651f84b4e ("rust: pci: implement I/O mappable `pci::Bar`")
Suggested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Marko Turk <mt@markoturk.info>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20260105213726.73000-2-mt@markoturk.info
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Document that the Bar's MMIO backend always assumes little-endian
devices and that its operations automatically convert to CPU endianness.
Signed-off-by: Marko Turk <mt@markoturk.info>
Link: https://lore.kernel.org/lkml/DE7F6RR1NAKW.3DJYO44O73941@kernel.org/
Link: https://patch.msgid.link/20251210112503.62925-1-mt@markoturk.info
[ Drop unrelated spelling fix. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
|
Convert all imports in the PCI Rust module to use "kernel vertical"
style.
With this subsequent patches neither introduce unrelated changes nor
leave an inconsistent import pattern.
While at it, drop unnecessary imports covered by prelude::*.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20251105120352.77603-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently request_irq() returns
Result<impl PinInit<irq::Registration<T>, Error> + 'a>
which may carry an error in the Result or the initializer; the same is
true for request_threaded_irq().
Use pin_init::pin_init_scope() to get rid of this redundancy.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103203053.2348783-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Consistently refer to PCI base address register as PCI BAR.
Fix spelling mistake "Mapps" -> "Maps".
Link: https://lore.kernel.org/rust-for-linux/20251015225827.GA960157@bhelgaas/
Link: https://github.com/Rust-for-Linux/linux/issues/1196
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Consistently use INTx, as in the description of IrqType::Intx, to refer
to the four legacy PCI interrupts, INTA#, INTB#, INTC#, and INTD#.
Link: https://lore.kernel.org/rust-for-linux/20251015230209.GA960343@bhelgaas/
Link: https://github.com/Rust-for-Linux/linux/issues/1196
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Move the PCI interrupt infrastructure to a separate sub-module in order
to keep things organized.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Move the PCI I/O infrastructure to a separate sub-module in order to
keep things organized.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Reduce coupling to implementation details of the formatting machinery by
avoiding direct use for `core`'s formatting traits and macros.
This backslid in commit ed78a01887e2 ("rust: pci: provide access to PCI
Class and Class-related items").
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://patch.msgid.link/20251018-cstr-core-v18-8-9378a54385f8@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The Display implementation for Vendor was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Vendor strings.
Improve things by doing a stringify!() call for each PCI Vendor item.
This now prints symbolic names such as "NVIDIA", instead of
"Vendor(0x10de)". It still falls back to Debug formatting for unknown
class values.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
[ Remove #[inline] for Vendor::fmt(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The Display implementation for Class was forwarding directly to Debug
printing, resulting in raw hex values instead of PCI Class strings.
Improve things by doing a stringify!() call for each PCI Class item.
This now prints symbolic names such as "DISPLAY_VGA", instead of
"Class(0x030000)". It still falls back to Debug formatting for unknown
class values.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Change Device::vendor_id() to return a Vendor type, and change
DeviceId::from_id() to accept a Vendor type.
Use the new pci::Vendor in the various Rust for Linux callers who were
previously using bindings::PCI_VENDOR_ID_*.
Doing so also allows removing "use kernel::bindings" entirely from most
of the affected files here.
Also, mark vendor_id() as inline.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250829223632.144030-6-jhubbard@nvidia.com
[ Replace "as a validated vendor" with "as [`Vendor`]". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
This allows callers to write Vendor::SOME_COMPANY instead of
bindings::PCI_VENDOR_ID_SOME_COMPANY.
New APIs:
Vendor::SOME_COMPANY
Vendor::from_raw() -- Only accessible from the pci (parent) module.
Vendor::as_raw()
Vendor: fmt::Display for Vendor
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250829223632.144030-3-jhubbard@nvidia.com
[ Minor doc-comment improvements, align Debug and Display. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Allow callers to write Class::STORAGE_SCSI instead of
bindings::PCI_CLASS_STORAGE_SCSI, for example.
New APIs:
Class::STORAGE_SCSI, Class::NETWORK_ETHERNET, etc.
Class::from_raw() -- Only callable from pci module.
Class::as_raw()
ClassMask: Full, ClassSubclass
Device::pci_class()
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250829223632.144030-2-jhubbard@nvidia.com
[ Minor doc-comment improvements, align Debug and Display. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
