| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
|
|
The test_memcg_sock test in memcontrol.c sets up an IPv6 socket and send
data over it to consume memory and verify that memory.stat.sock and
memory.current values are close.
On systems where IPv6 isn't enabled or not configured to support
SOCK_STREAM, the test_memcg_sock test always fails. When the socket()
call fails, there is no way we can test the memory consumption and verify
the above claim. I believe it is better to just skip the test in this
case instead of reporting a test failure hinting that there may be
something wrong with the memcg code.
Link: https://lkml.kernel.org/r/20260311200526.885899-1-longman@redhat.com
Fixes: 5f8f019380b8 ("selftests: cgroup/memcontrol: add basic test for socket accounting")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test_zswap_incompressible() to verify that the zswap_incomp memcg stat
correctly tracks incompressible pages.
The test allocates memory filled with random data from /dev/urandom, which
cannot be effectively compressed by zswap. When this data is swapped out
to zswap, it should be stored as-is and tracked by the zswap_incomp
counter.
The test verifies that:
1. Pages are swapped out to zswap (zswpout increases)
2. Incompressible pages are tracked (zswap_incomp increases)
test:
dd if=/dev/zero of=/swapfile bs=1M count=2048
chmod 600 /swapfile
mkswap /swapfile
swapon /swapfile
echo Y > /sys/module/zswap/parameters/enabled
./test_zswap
TAP version 13
1..8
ok 1 test_zswap_usage
ok 2 test_swapin_nozswap
ok 3 test_zswapin
ok 4 test_zswap_writeback_enabled
ok 5 test_zswap_writeback_disabled
ok 6 test_no_kmem_bypass
ok 7 test_no_invasive_cgroup_shrink
ok 8 test_zswap_incompressible
Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20260213071827.5688-3-jiayuan.chen@linux.dev
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
test_cgcore_populated (test_core) and test_cgkill_{simple,tree,forkbomb}
(test_kill) check cgroup.events "populated 0" immediately after reaping
child tasks with waitpid(). This used to work because cgroup_task_exit() in
do_exit() unlinked tasks from css_sets before exit_notify() woke up
waitpid().
d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done
switching out") moved the unlink to cgroup_task_dead() in
finish_task_switch(), which runs after exit_notify(). The populated counter
is now decremented after the parent's waitpid() can return, so there is no
longer a synchronous ordering guarantee. On PREEMPT_RT, where
cgroup_task_dead() is further deferred through lazy irq_work, the race
window is even larger.
The synchronous populated transition was never part of the cgroup interface
contract - it was an implementation artifact. Use cg_read_strcmp_wait() which
retries for up to 1 second, matching what these tests actually need to
verify: that the cgroup eventually becomes unpopulated after all tasks exit.
Fixes: d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: cgroups@vger.kernel.org
|
|
Add two new tests that verify inotify events are sent when memcg files
or directories are removed with rmdir.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260225223404.783173-4-tjmercier@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The cpuset_handle_hotplug() may need to invoke housekeeping_update(),
for instance, when an isolated partition is invalidated because its
last active CPU has been put offline.
As we are going to enable dynamic update to the nozh_full housekeeping
cpumask (HK_TYPE_KERNEL_NOISE) soon with the help of CPU hotplug,
allowing the CPU hotplug path to call into housekeeping_update() directly
from update_isolation_cpumasks() will likely cause deadlock. So we
have to defer any call to housekeeping_update() after the CPU hotplug
operation has finished. This is now done via the workqueue where
the update_hk_sched_domains() function will be invoked via the
hk_sd_workfn().
An concurrent cpuset control file write may have executed the required
update_hk_sched_domains() function before the work function is called. So
the work function call may become a no-op when it is invoked.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The "S+" command is used in the test matrix to enable the cpuset
controller. However this can be done automatically and we never use the
"S-" command to disable cpuset controller. Simplify the test matrix and
reduce clutter by removing the command and doing that automatically.
There is no functional change to the test cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
As stated in commit 1c09b195d37f ("cpuset: fix a regression in validating
config change"), it is not allowed to clear masks of a cpuset if
there're tasks in it. This is specific to v1 since empty "cpuset.cpus"
or "cpuset.mems" will cause the v2 cpuset to inherit the effective CPUs
or memory nodes from its parent. So it is OK to have empty cpus or mems
even if there are tasks in the cpuset.
Move this empty cpus/mems check in validate_change() to
cpuset1_validate_change() to allow more flexibility in setting
cpus or mems in v2. cpuset_is_populated() needs to be moved into
cpuset-internal.h as it is needed by the empty cpus/mems checking code.
Also add a test case to test_cpuset_prs.sh to verify that.
Reported-by: Chen Ridong <chenridong@huaweicloud.com>
Closes: https://lore.kernel.org/lkml/7a3ec392-2e86-4693-aa9f-1e668a668b9c@huaweicloud.com/
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Currently, when setting a cpuset's cpuset.cpus to a value that conflicts
with the cpuset.cpus/cpuset.cpus.exclusive of a sibling partition,
the sibling's partition state becomes invalid. This is overly harsh and
is probably not necessary.
The cpuset.cpus.exclusive control file, if set, will override the
cpuset.cpus of the same cpuset when creating a cpuset partition.
So cpuset.cpus has less priority than cpuset.cpus.exclusive in setting up
a partition. However, it cannot override a conflicting cpuset.cpus file
in a sibling cpuset and the partition creation process will fail. This
is inconsistent. That will also make using cpuset.cpus.exclusive less
valuable as a tool to set up cpuset partitions as the users have to
check if such a cpuset.cpus conflict exists or not.
Fix these problems by making sure that once a cpuset.cpus.exclusive
is set without failure, it will always be allowed to form a valid
partition as long as at least one CPU can be granted from its parent
irrespective of the state of the siblings' cpuset.cpus values. Of
course, setting cpuset.cpus.exclusive will fail if it conflicts with
the cpuset.cpus.exclusive or the cpuset.cpus.exclusive.effective value
of a sibling.
Partition can still be created by setting only cpuset.cpus without
setting cpuset.cpus.exclusive. However, any conflicting CPUs in sibling's
cpuset.cpus.exclusive.effective and cpuset.cpus.exclusive values will
be removed from its cpuset.cpus.exclusive.effective as long as there
is still one or more CPUs left and can be granted from its parent. This
CPU stripping is currently done in rm_siblings_excl_cpus().
The new code will now try its best to enable the creation of new
partitions with only cpuset.cpus set without invalidating existing ones.
However it is not guaranteed that all the CPUs requested in cpuset.cpus
will be used in the new partition even when all these CPUs can be
granted from the parent.
This is similar to the fact that cpuset.cpus.effective may not be
able to include all the CPUs requested in cpuset.cpus. In this case,
the parent may not able to grant all the exclusive CPUs requested in
cpuset.cpus to cpuset.cpus.exclusive.effective if some of them have
already been granted to other partitions earlier.
With the creation of multiple sibling partitions by setting
only cpuset.cpus, this does have the side effect that their exact
cpuset.cpus.exclusive.effective settings will depend on the order of
partition creation if there are conflicts. Due to the exclusive nature
of the CPUs in a partition, it is not easy to make it fair other than
the old behavior of invalidating all the conflicting partitions.
For example,
# echo "0-2" > A1/cpuset.cpus
# echo "root" > A1/cpuset.cpus.partition
# cat A1/cpuset.cpus.partition
root
# cat A1/cpuset.cpus.exclusive.effective
0-2
# echo "2-4" > B1/cpuset.cpus
# echo "root" > B1/cpuset.cpus.partition
# cat B1/cpuset.cpus.partition
root
# cat B1/cpuset.cpus.exclusive.effective
3-4
# cat B1/cpuset.cpus.effective
3-4
For users who want to be sure that they can get most of the CPUs they
want, cpuset.cpus.exclusive should be used instead if they can set
it successfully without failure. Setting cpuset.cpus.exclusive will
guarantee that sibling conflicts from then onward is no longer possible.
To make this change, we have to separate out the is_cpu_exclusive()
check in cpus_excl_conflict() into a cgroup v1 only
cpuset1_cpus_excl_conflict() helper. The cpus_allowed_validate_change()
helper is now no longer needed and can be removed.
Some existing tests in test_cpuset_prs.sh are updated and new ones are
added to reflect the new behavior. The cgroup-v2.rst doc file is also
updated the clarify what exclusive CPUs will be used when a partition
is created.
Reported-by: Sun Shaojie <sunshaojie@kylinos.cn>
Closes: https://lore.kernel.org/lkml/20251117015708.977585-1-sunshaojie@kylinos.cn/
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
nr_dying_descendants
Replace the manual sleep-and-retry logic in test_kmem_dead_cgroups()
with the new helper `cg_read_key_long_poll()`. This change improves
the robustness of the test by polling the "nr_dying_descendants"
counter in `cgroup.stat` until it reaches 0 or the timeout is exceeded.
Additionally, increase the retry timeout to 8 seconds (from 5 seconds)
based on testing results:
- With 5-second timeout: 4/20 runs passed.
- With 8-second timeout: 20/20 runs passed.
The 8 second timeout is based on stress testing of test_kmem_dead_cgroups()
under load: 5 seconds was occasionally not enough for reclaim of dying
descendants to complete, whereas 8 seconds consistently covered the observed
latencies. This value is intended as a generous upper bound for the
asynchronous reclaim and is not tied to any specific kernel constant, so it
can be adjusted in the future if reclaim behavior changes.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
test_memcg_sock() currently requires that memory.stat's "sock " counter
is exactly zero immediately after the TCP server exits. On a busy system
this assumption is too strict:
- Socket memory may be freed with a small delay (e.g. RCU callbacks).
- memcg statistics are updated asynchronously via the rstat flushing
worker, so the "sock " value in memory.stat can stay non-zero for a
short period of time even after all socket memory has been uncharged.
As a result, test_memcg_sock() can intermittently fail even though socket
memory accounting is working correctly.
Make the test more robust by polling memory.stat for the "sock "
counter and allowing it some time to drop to zero instead of checking
it only once. The timeout is set to 3 seconds to cover the periodic
rstat flush interval (FLUSH_TIME = 2*HZ by default) plus some
scheduling slack. If the counter does not become zero within the
timeout, the test still fails as before.
On my test system, running test_memcontrol 50 times produced:
- Before this patch: 6/50 runs passed.
- After this patch: 50/50 runs passed.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Introduce a new helper function `cg_read_key_long_poll()` in
cgroup_util.h. This function polls the specified key in a cgroup file
until it matches the expected value or the retry limit is reached,
with configurable wait intervals between retries.
This helper is particularly useful for handling asynchronously updated
cgroup statistics (e.g., memory.stat), where immediate reads may
observe stale values, especially on busy systems. It allows tests and
other utilities to handle such cases more flexibly.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
This follow-up patch completes centralization of kselftest.h and
ksefltest_harness.h includes in remaining seltests files, replacing all
relative paths with a non-relative paths using shared -I include path in
lib.mk
Tested with gcc-13.3 and clang-18.1, and cross-compiled successfully on
riscv, arm64, x86_64 and powerpc arch.
[reddybalavignesh9979@gmail.com: add selftests include path for kselftest.h]
Link: https://lkml.kernel.org/r/20251017090201.317521-1-reddybalavignesh9979@gmail.com
Link: https://lkml.kernel.org/r/20251016104409.68985-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/lkml/20250820143954.33d95635e504e94df01930d0@linux-foundation.org/
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mickael Salaun <mic@digikod.net>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conform the layout, informational and status messages to KTAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Suggested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The predicates in test expect event counting from 73e75e6fc352b
("cgroup/pids: Separate semantics of pids.events related to pids.max")
and the test would fail on older kernels. We want to have one version of
tests for all, so detect the feature and skip the test on old kernels.
(The test could even switch to check v1 semantics based on the flag but
keep it simple for now.)
Fixes: 9f34c566027b6 ("selftests: cgroup: Add basic tests for pids controller")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Test cgroup v2 freezer time stat. Freezer time accounting should
be independent of other cgroups in the hierarchy and should increase
iff a cgroup is CGRP_FREEZE (regardless of whether it reaches
CGRP_FROZEN).
Skip these tests on systems without freeze time accounting.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Current cpu.max tests (both the normal one and the nested one) are broken.
They setup cpu.max with 1000 us quota and the default period (100,000 us).
A cpu hog is run for a duration of 1s as per wall clock time. This corresponds
to 10 periods, hence an expected usage of 10,000 us. We want the measured
usage (as per cpu.stat) to be close to 10,000 us.
Previously, this approximate equality test was done by
`!values_close(usage_usec, expected_usage_usec, 95)`: if the absolute
difference between usage_usec and expected_usage_usec is greater than 95% of
their sum, then we pass. And expected_usage_usec was set to 1,000,000 us.
Mathematically, this translates to the following being true for pass:
|usage - expected_usage| > (usage + expected_usage)*0.95
If usage > expected_usage:
usage - expected_usage > (usage + expected_usage)*0.95
0.05*usage > 1.95*expected_usage
usage > 39*expected_usage = 39s
If usage < expected_usage:
expected_usage - usage > (usage + expected_usage)*0.95
0.05*expected_usage > 1.95*usage
usage < 0.0256*expected_usage = 25,600 us
Combined,
Pass if usage < 25,600 us or > 39 s,
which makes no sense given that all we need is for usage_usec to be close to
10,000 us.
Fix this by explicitly calcuating the expected usage duration based on the
configured quota, default period, and the duration, and compare usage_usec
and expected_usage_usec using values_close() with a 10% error margin.
Also, use snprintf to get the quota string to write to cpu.max instead of
hardcoding the quota, ensuring a single source of truth.
Remove the check comparing user_usec and expected_usage_usec, since on running
this test modified with printfs, it's seen that user_usec and usage_usec can
regularly exceed the theoretical expected_usage_usec:
$ sudo ./test_cpu
user: 10485, usage: 10485, expected: 10000
ok 1 test_cpucg_max
user: 11127, usage: 11127, expected: 10000
ok 2 test_cpucg_max_nested
$ sudo ./test_cpu
user: 10286, usage: 10286, expected: 10000
ok 1 test_cpucg_max
user: 10404, usage: 11271, expected: 10000
ok 2 test_cpucg_max_nested
Hence, a values_close() check of usage_usec and expected_usage_usec is
sufficient.
Fixes: a79906570f9646ae17 ("cgroup: Add test_cpucg_max_nested() testcase")
Fixes: 889ab8113ef1386c57 ("cgroup: Add test_cpucg_max() testcase")
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fixes malformed test output due to missing newline
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test_kmem_dead_cgroups test currently assumes that RCU and
memory reclaim will complete within 5 seconds. In some environments
this timeout may be insufficient, leading to spurious test failures.
This patch introduces max_time set to 20 which is then used in the
test. After 5th sec the debug message is printed to indicate the
cleanup is still ongoing.
In the system under test with 16 CPUs the original test was failing
most of the time and the cleanup time took usually approx. 6sec.
Further tests were conducted with and without do_rcu_barrier and the
results (respectively) are as follow:
quantiles 0 0.25 0.5 0.75 1
1 2 3 8 20 (mean = 4.7667)
3 5 8 8 20 (mean = 7.6667)
Acked-by: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test would be skipped because of nsdelegate, so the defined value is
not used (0 is always acceptable).
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Use the missing mount of the unifier hierarchy as a hint of legacy
system and prepare our own named v1 hierarchy for tests.
The code is only in test_core.c and not cgroup_util.c because other
selftests are related to controllers which will be exposed on v2
hierarchy but named hierarchies are only v1 thing.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This comes useful when using selftests from mainline on older
kernels/setups that still rely on cgroup v1.
The core tests that rely on v2 specific features are skipped, the
remaining ones are adjusted to work with a v1 hierarchy.
The expected output on v1 system:
ok 1 # SKIP test_cgcore_internal_process_constraint
ok 2 # SKIP test_cgcore_top_down_constraint_enable
ok 3 # SKIP test_cgcore_top_down_constraint_disable
ok 4 # SKIP test_cgcore_no_internal_process_constraint_on_threads
ok 5 # SKIP test_cgcore_parent_becomes_threaded
ok 6 # SKIP test_cgcore_invalid_domain
ok 7 # SKIP test_cgcore_populated
ok 8 test_cgcore_proc_migration
ok 9 test_cgcore_thread_migration
ok 10 test_cgcore_destroy
ok 11 test_cgcore_lesser_euid_open
ok 12 # SKIP test_cgcore_lesser_ns_open
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Non-functional change, the control variable will be wired in a separate
commit.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
Add an API in the cgroups library to find the root of a specific
controller. KVM selftests will use the API to find the memory controller.
Search for the controller on both v1 and v2 mounts, as KVM selftests'
usage will be completely oblivious of v1 versus v2.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-6-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests will soon need to use some of the cgroup creation and
deletion functionality from cgroup_util.
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250508184649.2576210-5-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move a handful of helpers out of cgroup_util.c and into test_memcontrol.c
that have nothing to with cgroups in general, in anticipation of making
cgroup_util.c a generic library that can be used by other selftests.
Make read_text() and write_text() non-static so test_memcontrol.c can
use them.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-4-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
test_memcg_protection()
The test_memcg_protection() function is used for the test_memcg_min and
test_memcg_low sub-tests. This function generates a set of parent/child
cgroups like:
parent: memory.min/low = 50M
child 0: memory.min/low = 75M, memory.current = 50M
child 1: memory.min/low = 25M, memory.current = 50M
child 2: memory.min/low = 0, memory.current = 50M
After applying memory pressure, the function expects the following actual
memory usages.
parent: memory.current ~= 50M
child 0: memory.current ~= 29M
child 1: memory.current ~= 21M
child 2: memory.current ~= 0
In reality, the actual memory usages can differ quite a bit from the
expected values. It uses an error tolerance of 10% with the
values_close() helper.
Both the test_memcg_min and test_memcg_low sub-tests can fail sporadically
because the actual memory usage exceeds the 10% error tolerance. Below
are a sample of the usage data of the tests runs that fail.
Child Actual usage Expected usage %err
----- ------------ -------------- ----
1 16990208 22020096 -12.9%
1 17252352 22020096 -12.1%
0 37699584 30408704 +10.7%
1 14368768 22020096 -21.0%
1 16871424 22020096 -13.2%
The current 10% error tolerenace might be right at the time
test_memcontrol.c was first introduced in v4.18 kernel, but memory reclaim
have certainly evolved quite a bit since then which may result in a bit
more run-to-run variation than previously expected.
Increase the error tolerance to 15% for child 0 and 20% for child 1 to
minimize the chance of this type of failure. The tolerance is bigger for
child 1 because an upswing in child 0 corresponds to a smaller %err than a
similar downswing in child 1 due to the way %err is used in
values_close().
Before this patch, a 100 test runs of test_memcontrol produced the
following results:
17 not ok 1 test_memcg_min
22 not ok 2 test_memcg_low
After applying this patch, there were no test failure for test_memcg_min
and test_memcg_low in 100 test runs. However, these tests may still fail
once in a while if the memory usage goes beyond the newly extended range.
Link: https://lkml.kernel.org/r/20250502010443.106022-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memcg: Fix test_memcg_min/low test failures", v8.
The test_memcontrol selftest consistently fails its test_memcg_low
sub-test (with memory_recursiveprot enabled) and sporadically fails its
test_memcg_min sub-test. This patchset fixes the test_memcg_min and
test_memcg_low failures by adjusting the test_memcontrol selftest to fix
these test failures.
This patch (of 8):
The test_memcontrol selftest consistently fails its test_memcg_low
sub-test due to the fact that its 3rd test child cgroup which have a
memmory.low of 0 have low event count. This happens when
memory_recursiveprot mount option is enabled which is the default setting
used by systemd to mount cgroup2 filesystem.
This issue was originally fixed by commit cdc69458a5f3 ("cgroup: account
for memory_recursiveprot in test_memcg_low()"). It was later reverted by
commit 1d09069f5313 ("selftests: memcg: expect no low events in
unprotected sibling") expecting the memory reclaim code would be fixed.
However, it turns out the unprotected cgroup may still have some residual
effective memory.low protection depending on the memory.low settings in
its parent and its siblings. As a result, low events may still be
triggered.
One way to fix the test failure is to revert the revert commit. However,
Michal suggested that it might be better to ignore the low event count
with memory_recursiveprot enabled as low event may or may not happen
depending on the actual test configuration.
Modify the test_memcontrol.c to ignore low event in the 3rd child cgroup
with memory_recursiveprot on.
The 4th child cgroup has no memory usage and so has an effective low of 0.
It has no low event count because the mem_cgroup_below_low() check in
shrink_node_memcgs() is skipped as mem_cgroup_below_min() returns true.
If we ever change mem_cgroup_below_min() in such a way that it no longer
skips the no usage case, we will have to add code to explicitly skip it.
With this patch applied, the test_memcg_low sub-test finishes successfully
without failure in most cases. Though both test_memcg_low and
test_memcg_min sub-tests may still fail occasionally if the memory.current
values fall outside of the expected ranges.
Link: https://lkml.kernel.org/r/20250502010443.106022-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20250502010443.106022-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current cgroup directory layout for running the partition state
transition tests is mainly suitable for testing local partitions as
well as with a mix of local and remote partitions. It is not that
suitable for doing extensive remote partition and nested remote/local
partition testing.
Add a new set of remote partition tests REMOTE_TEST_MATRIX with another
cgroup directory structure more tailored for remote partition testing
to provide better code coverage.
Also add a few new test cases as well as adjusting existig ones for
the original TEST_MATRIX.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cleaning up the test_cpuset_prs.sh script and restructure some of the
functions so that a new test matrix with a different cgroup directory
structure can be added in the next patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
state separator
Currently, ',' is used as the cgroup separator of the expected effective
CPUs and partition root states in the test matrix. However, ',' can be
part of the output of the cpuset.cpus*.effective and cpuset.cpus.isolated
files. Change the separator to '|' so that ',' can appear as part of
the expected values.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
handle remote partition
Currently, changes in exclusive CPUs are being handled in
remote_partition_check() by disabling conflicting remote partitions.
However, that may lead to results unexpected by the users. Fix
this problem by removing remote_partition_check() and making
update_cpumasks_hier() handle changes in descendant remote partitions
properly.
The compute_effective_exclusive_cpumask() function is enhanced to check
the exclusive_cpus and effective_xcpus from siblings and excluded them
in its effective exclusive CPUs computation and return a value to show if
there is any sibling conflicts. This is somewhat like the cpu_exclusive
flag check in validate_change(). This is the initial step to enable us
to retire the use of cpu_exclusive flag in cgroup v2 in the future.
One of the tests in the TEST_MATRIX of the test_cpuset_prs.sh
script has to be updated due to changes in the way a child remote
partition root is being handled (updated instead of invalidation)
in update_cpumasks_hier().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The script uses non-POSIX features like `[[` for conditionals and hence
does not work when run with a POSIX /bin/sh.
Change the shebang to /bin/bash instead, like the other tests in cgroup.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Isolated CPUs are not allowed to be used in a non-isolated partition.
The only exception is the top cpuset which is allowed to contain boot
time isolated CPUs.
Commit ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation
problem") introduces a simplified scheme of including only partition
roots in sched domain generation. However, it does not properly account
for this exception case. This can result in leakage of isolated CPUs
into a sched domain.
Fix it by making sure that isolated CPUs are excluded from the top
cpuset before generating sched domains.
Also update the way the boot time isolated CPUs are handled in
test_cpuset_prs.sh to make sure that those isolated CPUs are really
isolated instead of just skipping them in the tests.
Fixes: ccac8e8de99c ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When compiling the cgroup selftests with the following command:
make -C tools/testing/selftests/cgroup/
the compiler complains as below:
test_cpu.c: In function ‘test_cpucg_nice’:
test_cpu.c:284:39: error: incompatible type for argument 2 of ‘hog_cpus_timed’
284 | hog_cpus_timed(cpucg, param);
| ^~~~~
| |
| struct cpu_hog_func_param
test_cpu.c:132:53: note: expected ‘void *’ but argument is of type ‘struct cpu_hog_func_param’
132 | static int hog_cpus_timed(const char *cgroup, void *arg)
| ~~~~~~^~~
Fix it by passing the address of param to hog_cpus_timed().
Fixes: 2e82c0d4562a ("cgroup/rstat: Selftests for niced CPU statistics")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Creates a cgroup with a single nice CPU hog process running.
fork() is called to generate the nice process because un-nicing is
not possible (see man nice(3)). If fork() was not used to generate
the CPU hog, we would run the rest of the cgroup selftest suite as a
nice process.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
Ensure that zswap.writeback check goes up the cgroup tree, i.e. is
hierarchical. Create a subcgroup which has zswap.writeback set to 1, and
the upper hierarchy's restrictions shall apply.
Link: https://lkml.kernel.org/r/20240823162506.12117-2-me@yhndnzj.com
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.
The new/updated tests attempt to detect a lack of the write handler by
fstat'ing the memory.peak and memory.swap.peak files and skip the tests if
that's the case. Additionally, skip if the file doesn't exist at all.
[davidf@vimeo.com: update tests]
Link: https://lkml.kernel.org/r/20240730231304.761942-3-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-3-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
CONFIG_MEMCG_KMEM used to be a user-visible option for whether slab
tracking is enabled. It has been default-enabled and equivalent to
CONFIG_MEMCG for almost a decade. We've only grown more kernel memory
accounting sites since, and there is no imaginable cgroup usecase going
forward that wants to track user pages but not the multitude of
user-drivable kernel allocations.
Link: https://lkml.kernel.org/r/20240701153148.452230-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
