| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert remaining __init__ files similar to what we did in
commit b615879dbfea ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for making sure device can disappear while associations
exist. This is netdevsim-only since destroying real devices is
more tricky.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-9-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for exercising PSP associations for TCP sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-6-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simple PSP test to getting info about PSP devices.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-3-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On fast machines the tests run in quick succession so even
when tests clean up after themselves the carrier may need
some time to come back.
Specifically in NIPA when ping.py runs right after netpoll_basic.py
the first ping command fails.
Since the context manager callbacks are now common NetDrvEpEnv
gets an ip link up call as well.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250812142054.750282-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bpf utility to simplify the use of bpftool for XDP tests included in
this series.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250710184351.63797-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
distribution
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pylint doesn't understand our path hacks, and it generates a lot
of warnings for driver tests. Import what we use one by one, this
is hopefully not too tedious and it makes pylint happy.
Link: https://patch.msgid.link/20250621171944.2619249-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While we are not very interested in testing performance
it's useful to be able to generate a lot of traffic.
iperf is the simplest way of getting relatively high PPS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the remote endpoint "model". To execute most meaningful device
driver tests we need to be able to communicate with a remote system,
and have it send traffic to the device under test.
Various test environments will have different requirements.
0) "Local" netdevsim-based testing can simply use net namespaces.
netdevsim supports connecting two devices now, to form a veth-like
construct.
1) Similarly on hosts with multiple NICs, the NICs may be connected
together with a loopback cable or internal device loopback.
One interface may be placed into separate netns, and tests
would proceed much like in the netdevsim case. Note that
the loopback config or the moving of one interface
into a netns is not expected to be part of selftest code.
2) Some systems may need to communicate with the remote endpoint
via SSH.
3) Last but not least environment may have its own custom communication
method.
Fundamentally we only need two operations:
- run a command remotely
- deploy a binary (if some tool we need is built as part of kselftests)
Wrap these two in a class. Use dynamic loading to load the Remote
class. This will allow very easy definition of other communication
methods without bothering upstream code base.
Stick to the "simple" / "no unnecessary abstractions" model for
referring to the remote endpoints. The host / remote object are
passed as an argument to the usual cmd() or ip() invocation.
For example:
ip("link show", json=True, host=remote)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add drivers/net as a target for mixed-use tests.
The setup is expected to work similarly to the forwarding tests.
Since we only need one interface (unlike forwarding tests)
read the target device name from NETIF. If not present we'll
try to run the test against netdevsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
