| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The fchmodat2 test program open codes a version of ksft_finished(), use
the standard version.
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-2-a6419435f2e8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/fchmodat2: Error handling and general", v4.
I looked at the fchmodat2() tests since I've been experiencing some random
intermittent segfaults with them in my test systems, while doing so I
noticed these two issues. Unfortunately I didn't figure out the original
yet, unless I managed to fix it unwittingly.
This patch (of 2):
The fchmodat2() test program creates a temporary directory with a file and
a symlink for every test it runs but never cleans these up, resulting in
${TMPDIR} getting left with stale files after every run. Restructure the
program a bit to ensure that we clean these up, this is more invasive than
it might otherwise be due to the extensive use of ksft_exit_fail_msg() in
the program.
As a side effect this also ensures that we report a consistent test name
for the tests and always try both tests even if they are skipped.
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-0-a6419435f2e8@kernel.org
Link: https://lkml.kernel.org/r/20260226-selftests-fchmodat2-v4-1-a6419435f2e8@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This follow-up patch completes centralization of kselftest.h and
ksefltest_harness.h includes in remaining seltests files, replacing all
relative paths with a non-relative paths using shared -I include path in
lib.mk
Tested with gcc-13.3 and clang-18.1, and cross-compiled successfully on
riscv, arm64, x86_64 and powerpc arch.
[reddybalavignesh9979@gmail.com: add selftests include path for kselftest.h]
Link: https://lkml.kernel.org/r/20251017090201.317521-1-reddybalavignesh9979@gmail.com
Link: https://lkml.kernel.org/r/20251016104409.68985-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/lkml/20250820143954.33d95635e504e94df01930d0@linux-foundation.org/
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mickael Salaun <mic@digikod.net>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
gcc requires -static-libasan in order to ensure that Address Sanitizer's
library is the first one loaded. However, this leads to build failures
on clang, when building via:
make LLVM=1 -C tools/testing/selftests
However, clang already does the right thing by default: it statically
links the Address Sanitizer if -fsanitize is specified. Therefore,
simply omit -static-libasan for clang builds. And leave behind a
comment, because the whole reason for static linking might not be
obvious.
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted. If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.
commit 58e2847ad2e6 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`. It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD. Therefore selftests
that use ASan started failing.
Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option. Note this is already the default for
Clang, but not got GCC.
Test output sample for failing case:
TAP version 13
1..3
# timeout set to 300
# selftests: openat2: openat2_test
# ==4052==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 1 selftests: openat2: openat2_test # exit=1
# timeout set to 300
# selftests: openat2: resolve_test
# ==4070==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 2 selftests: openat2: resolve_test # exit=1
Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2e6 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These duplicate defines should automatically be picked up from kernel
headers. Use KHDR_INCLUDES to add kernel header files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Message-Id: <20230805073809.1753462-4-usama.anjum@collabora.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The test marks as skipped if a syscall with the AT_SYMLINK_NOFOLLOW flag
fails. This is because not all filesystems support changing the mode
bits of symlinks properly. These filesystems return an error but change
the mode bits:
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
newfstatat(4, "symlink", {st_mode=S_IFLNK|0777, st_size=7, ...}, AT_SYMLINK_NOFOLLOW) = 0
syscall_0x1c3(0x4, 0x55fa1f244396, 0x180, 0x100, 0x55fa1f24438e, 0x34) = -1 EOPNOTSUPP (Operation not supported)
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
This happens with btrfs and xfs:
$ tools/testing/selftests/fchmodat2/fchmodat2_test
TAP version 13
1..1
ok 1 # SKIP fchmodat2(symlink)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
$ stat /tmp/ksft-fchmodat2.*/symlink
File: /tmp/ksft-fchmodat2.3NCqlE/symlink -> regfile
Size: 7 Blocks: 0 IO Block: 4096 symbolic link
Device: 7,0 Inode: 133 Links: 1
Access: (0600/lrw-------) Uid: ( 0/ root) Gid: ( 0/ root)
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Message-Id: <4532a04a870ff589ba62ceeacf76f0bd81b9ba01.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
