| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We have a couple of tests that depend on Perl for textconv scripts.
Refactor these tests to instead be implemented via shell utilities so
that we can drop a couple of PERL_TEST_HELPERS prerequisites.
Note that the conversion in t4030 is not a one-to-one equivalent to the
previous textconv script. Before this change we used to essentially do a
hexdump via Perl. The obvious conversion here would be to use `test-tool
hexdump` like we do for the other tests. But this would lead to a ripple
effect where we would have to adapt a bunch of other tests with a bunch
of seemingly unrelated changes, which would be somewhat awkward.
Instead, we're going with the minimum viable change: the test files we
write contain "\001" and "\000", and the test's expectation is that
those get translated into proper ASCII characters. So instead of doing a
full hexdump, we simply use tr(1) to translate these specific bytes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the early days of Git, Perl was used quite prominently throughout the
project. This has changed significantly as almost all of the executables
we ship nowadays have eventually been rewritten in C. Only a handful of
subsystems remain that require Perl:
- gitweb, a read-only web interface.
- A couple of scripts that allow importing repositories from GNU Arch,
CVS and Subversion.
- git-send-email(1), which can be used to send mails.
- git-request-pull(1), which is used to request somebody to pull from
a URL by sending an email.
- git-filter-branch(1), which uses Perl with the `--state-branch`
option. This command is typically recommended against nowadays in
favor of git-filter-repo(1).
- Our Perl bindings for Git.
- The netrc Git credential helper.
None of these subsystems can really be considered to be part of the
"core" of Git, and an installation without them is fully functional.
It is more likely than not that an end user wouldn't even notice that
any features are missing if those tools weren't installed. But while
Perl nowadays very much is an optional dependency of Git, there is a
significant limitation when Perl isn't available: developers cannot run
our test suite.
Preceding commits have started to lift this restriction by removing the
strict dependency on Perl in many central parts of the test library. But
there are still many tests that rely on small Perl helpers to do various
different things.
Introduce a new PERL_TEST_HELPERS prerequisite that guards all tests
that require Perl. This prerequisite is explicitly different than the
preexisting PERL prerequisite:
- PERL records whether or not features depending on the Perl
interpreter are built.
- PERL_TEST_HELPERS records whether or not a Perl interpreter is
available for our tests.
By having these two separate prerequisites we can thus distinguish
between tests that inherently depend on Perl because the underlying
feature does, and those tests that depend on Perl because the test
itself is using Perl.
Adapt all tests to set the PERL_TEST_HELPERS prerequisite as needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When merging file pairs after they have been broken up we queue a new
file pair and discard the broken-up ones. The newly-queued file pair
reuses one filespec of the broken up pairs each, where the respective
other filespec gets discarded. But we only end up freeing the filespec's
data, not the filespec itself, and thus leak memory.
Fix these leaks by using `free_filespec()` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These changes are in the same spirit as the six patches that
precede them, but they haven't been split into individually
justifiable patches yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
$ git diff --stat --summary HEAD^ HEAD
foo.rand | Bin 4096 -> 4096 bytes
1 files changed, 0 insertions(+), 0 deletions(-)
$ git diff --stat --summary -B HEAD^ HEAD
foo.rand | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
rewrite foo.rand (100%)
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recall that MSYS bash converts POSIX style absolute paths to Windows style
absolute paths. Unfortunately, it converts a program argument that begins
with a double-quote and otherwise looks like an absolute POSIX path, but
in doing so, it strips everything past the second double-quote[*]. This
case is triggered in the two test scripts. The work-around is to place the
Windows style path returned by $(pwd) between the quotes to avoid the path
conversion.
[*] It is already bogus that a conversion is even considered when a program
argument begins with a double-quote because it cannot be an absolute POSIX
path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently textconv helpers are run directly. Running through
the shell is useful because the user can provide a program
with command line arguments, like "antiword -f".
It also makes textconv more consistent with other parts of
git, most of which run their helpers using the shell.
The downside is that textconv helpers with shell
metacharacters (like space) in the filename will be broken.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When I tweaked the patch to use $SHELL_PATH instead of a hard-coded
"#!/bin/sh" to produce 3aa1f7c (diff: respect textconv in rewrite diffs,
2008-12-09), I screwed up. This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently we just skip rewrite diffs for binary files; this
patch makes an exception for files which will be textconv'd,
and actually performs the textconv before generating the
diff.
Conceptually, rewrite diffs should be in the exact same
format as the a non-rewrite diff, except that we refuse to
share any context. Thus it makes very little sense for "git
diff" to show a textconv'd diff, but for "git diff -B" to
show "Binary files differ".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current emit_rewrite_diff code always writes a text patch without
checking whether the content is binary. This means that if you end up with
a rewrite diff for a binary file, you get lots of raw binary goo in your
patch.
Instead, if we have binary files, then let's just skip emit_rewrite_diff
altogether. We will already have shown the "dissimilarity index" line, so
it is really about the diff contents. If binary diffs are turned off, the
"Binary files a/file and b/file differ" message should be the same in
either case. If we do have binary patches turned on, there isn't much
point in making a less-efficient binary patch that does a total rewrite;
no human is going to read it, and since binary patches don't apply with
any fuzz anyway, the result of application should be the same.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
