aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/nxp (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-09-15Merge tag 'imx-dt-6.18' of ↵Arnd Bergmann82-407/+271
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.18: - A series from Alexander Stein to clean up the most of dt-schema warnings for LS1021A - A couple of changes from Bence Csókás to replace license text comment with SPDX identifier for imx6-display5 and imx6-aristainetos2 board - A couple of vfxxx dt-schema cleanups from Fabio Estevam - A bunch of changes from Frank Li to clean up dt-schema warnings on various platforms, VF610, LS1021A, i.MX6, etc. - Minor whitespace cleanup on i.MX8ULL from Krzysztof Kozlowski - An imx6ulz-bsh-smm-m2 workaround from Wolfgang Birkner to get resume via console work * tag 'imx-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits) ARM: dts: imx6sll: Use 'dma-names' ARM: dts: imx6: change rtc compatible string to st,m41t00 from m41t00 ARM: dts: imx6: remove undefined linux,default-trigger source ARM: dts: imx6ul-pico: add power-supply for vxt,vl050-8048nt-c01 ARM: dts: imx6ul-14x14-evk: add regulator for ov5640 ARM: dts: imx6: replace isl,isl12022 with isil,isl12022 for RTC ARM: dts: imx6: replace gpio-key with gpio-keys compatible string ARM: dts: imx6: rename i2c<n>mux i2c-mux-<n> ARM: dts: imx6: rename node name flash to eeprom ARM: dts: imx6: rename node i2c-gpio to i2c. ARM: dts: imx6: rename touch screen's node name to touchscreen ARM: dts: imx6: remove redundant pinctrl-names ARM: dts: imx6qdl-aristainetos2: rename ethernet-phy to ethernet-phy@0 ARM: dts: imx6: add interrupt-cells for dlg,da9063 pmic ARM: dts: imx6: align rtc chip node name to 'rtc' ARM: dts: imx6: add key- prefix for gpio-keys ARM: dts: imx6: add #address-cells for gsc@20 ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios` ARM: dts: mba6ul: Add MicIn routing ARM: dts: ls1021a-tsn: Remove redundant #address-cells for ethernet-switch@1 ... Link: https://lore.kernel.org/r/20250915132535.253859-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-09-11ARM: dts: imx6sll: Use 'dma-names'Fabio Estevam1-1/+1
'dma-name' is not a valid property and causes the following dt-schema warning: dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null' Fix it by using 'dma-names' instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: change rtc compatible string to st,m41t00 from m41t00Frank Li1-1/+1
m41t00 compatible is not existing. Change it to st,m41t00 to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@68: failed to match any schema with compatible: ['m41t00'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: remove undefined linux,default-trigger sourceFrank Li6-12/+12
Set gpio/off to none for linux,default-trigger. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dtb: user-leds (gpio-leds): user-led1:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: 'gpio' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'netdev', 'none', 'rc-feedback', 'torch', 'usb-gadget', 'usb-host', 'usbport'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6ul-pico: add power-supply for vxt,vl050-8048nt-c01Frank Li1-0/+1
Add power-supply for vxt,vl050-8048nt-c01 to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: panel (vxt,vl050-8048nt-c01): 'power-supply' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6ul-14x14-evk: add regulator for ov5640Frank Li1-0/+23
Add required power supply for ov5640. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtb: camera@3c (ovti,ov5640): 'AVDD-supply' is a required property from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: replace isl,isl12022 with isil,isl12022 for RTCFrank Li1-1/+1
The compatible string isl,isl12022 is typo, it should be isil,isl12022. Fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dtb: /soc/bus@2100000/i2c@21a0000/rtc@6f: failed to match any schema with compatible: ['isl,isl12022'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: replace gpio-key with gpio-keys compatible stringFrank Li2-2/+2
Compatible string 'gpio-key' is not existed. Correct it to 'gpio-keys'. Fix below CHECK_DTBS warnings arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dtb: /gpio-keys: failed to match any schema with compatible: ['gpio-key'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: rename i2c<n>mux i2c-mux-<n>Frank Li2-4/+4
Rename i2c<n>mux i2c-mux-<n> to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dtb: i2c2mux (i2c-mux-gpio): $nodename:0: 'i2c2mux' does not match '^(i2c-?)?mux' from schema $id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: rename node name flash to eepromFrank Li2-2/+2
Rename node name flash to eeprom to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: flash@0 (atmel,at25): $nodename: 'anyOf' conditional failed, one must be fixed: 'flash@0' does not match '^eeprom@[0-9a-f]{1,2}$' 'flash@0' does not match '^fram@[0-9a-f]{1,2}$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: rename node i2c-gpio to i2c.Frank Li1-1/+1
Rename node name i2c-gpio to i2c to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dtb: / (karo,imx6ul-tx6ul): i2c-gpio: {'compatible': ['i2c-gpio'], '#address-cells': 1, '#size-cells': 0, 'pinctrl-names': ['default'], 'pinctrl-0': [[68]], 'sda-gpios': [[46, 1, 0]], 'scl-gpios': [[46, 0, 0]], 'clock-frequency': 400000, 'status': ['okay'], 'rtc@68': {'compatible': ['dallas,ds1339'], 'reg': [[104]], 'status': ['disabled']}} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: rename touch screen's node name to touchscreenFrank Li7-8/+8
Rename touch to touchscreen. Rename stmpe_touchscreen to touchscreen. Rename stmpe_adc to adc. Fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dtb: touch@48 (ti,tsc2004): 'wakeup-gpios' does not match any of the regexes: '^pinctrl-[0-9]+$' from schema $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: remove redundant pinctrl-namesFrank Li7-11/+0
Remove redundant pinctrl-name because no pinctrl-0 existed to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dtb: pwm@2084000 (fsl,imx6q-pwm): 'pinctrl-0' is a dependency of 'pinctrl-names' from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6qdl-aristainetos2: rename ethernet-phy to ethernet-phy@0Frank Li1-1/+2
Rename ethernet-phy to ethernet-phy@0 to fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dtb: ethernet@2188000 (fsl,imx6q-fec): mdio: Unevaluated properties are not allowed ('ethernet-phy' was unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: add interrupt-cells for dlg,da9063 pmicFrank Li3-0/+6
Add interrupt-cells for pmic to fix below CHECK_DTBS warnings: arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dtb: pmic@58 (dlg,da9063): 'interrupt-controller' is a required property from schema $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: align rtc chip node name to 'rtc'Frank Li15-15/+15
Rename node name ds1672 to rtc to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: ds1672@68 (dallas,ds1672): $nodename:0: 'ds1672@68' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$ Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: add key- prefix for gpio-keysFrank Li31-116/+116
Add key- prefix for gpio-keys and rename button_0 to button-0 to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dtb: gpio-keys (gpio-keys): 'eeprom-wp', ... do not match any of the regexes: '^(button|...))$', 'pinctrl-[0-9]+ Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6: add #address-cells for gsc@20Frank Li12-0/+12
Add #address-cells for gsc20 to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dtb: gsc@20 (gw,gsc): '#address-cells' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios`Bence Csókás1-2/+8
The Ethernet PHY's reset GPIO should be specified in the node of the PHY itself, instead of the MAC (`fec`). The latter is deprecated, and was an i.MX-specific extension, incompatible with the new reset controller subsystem. Co-developed-by: Csaba Buday <buday.csaba@prolan.hu> Signed-off-by: Csaba Buday <buday.csaba@prolan.hu> Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: mba6ul: Add MicIn routingAlexander Stein1-0/+7
MicIn is connected to IN3_L. Add routing including the Mic Bias. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: ls1021a-tsn: Remove redundant #address-cells for ethernet-switch@1Frank Li1-2/+0
Remove redundant #address-cells and #size-cells for ethernet-switch@1 because children node have not address. Fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dtb: ethernet-switch@1 (nxp,sja1105t): Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: ls1021a: Rename esdhc@1560000 to mmc@1560000Frank Li1-1/+1
Rename node name esdhc@1560000 to mmc@1560000 to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb: esdhc@1560000 (fsl,ls1021a-esdhc): $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: ls1021a: Rename 'mdio-mux-emi1' to 'mdio-mux@54'Frank Li1-2/+2
Rename 'mdio-mux-emi1' to 'mdio-mux@54'. Add fallback compatible string mdio-mux. Fix below warning: arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: 'oneOf' conditional failed, one must be fixed: 'bank-width', 'device-width', 'mdio-mux-emi1' do not match any of the regexes: '^mdio-mux@[a-f0-9,]+$', 'pinctrl-[0-9]+' Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: ls1021a: Rename node name nor to flashFrank Li2-3/+3
Rename node name nor to flash to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/ls/ls1021a-twr.dtb: memory-controller@1530000 (fsl,ifc): 'nor@0,0' does not match any of the regexes: '(flash|fpga|board-control|cpld)@[a-f0-9]+(,[a-f0-9]+)+$', '^nand@[a-f0-9]+(,[a-f0-9]+)+$', '^pinctrl-[0-9]+$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-09-11ARM: dts: lpc32xx: Correct PL080 DMA controller device node nameVladimir Zapolskiy1-1/+1
Rename PL080 DMA controller device node name to the expected one. The issue was reported by a dt binding checker: dma@31000000: $nodename:0: 'dma@31000000' does not match '^dma-controller(@.*)?$' Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc32xx: Specify #dma-cells property of PL080 DMA controllerVladimir Zapolskiy1-0/+1
For DMA controllers it is required to specify a number of the cells for users. The change eliminates the next build time reported warning: dma@31000000: '#dma-cells' is a required property Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc32xx: Specify a precise version of the SD/MMC controller IPVladimir Zapolskiy1-1/+1
The SD/MMC controller on NXP LPC32xx SoC is ARM PrimeCell PL180, it is reported by the driver: mmci-pl18x 20098000.sd: mmc0: PL180 manf 41 rev0 at 0x20098000 irq 36,37 (pio) Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc32xx: Correct SD/MMC controller device node nameVladimir Zapolskiy1-1/+1
Change the PL180 SD/MMC controller device node name to the expected 'mmc' one. The change removes a reported warning: sd@20098000: $nodename:0: 'sd@20098000' does not match '^mmc(@.*)?$' Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc32xx: Correct motor PWM device tree node nameVladimir Zapolskiy1-1/+1
Change once a customly selected 'mpwm' node name in favour of the expected 'pwm' one. The change eliminates a reported warning: mpwm@400e8000: $nodename:0: 'mpwm@400e8000' does not match '^pwm(@.*|-([0-9]|[1-9][0-9]+))?$' Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cellsVladimir Zapolskiy1-1/+1
Since commit 4cd2f417a0ac ("dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format") both types of PWM controlles on NXP LPC32xx SoC fairly gained 3 cells, reflect it in the platform dtsi file. The change removes a dt binding checker warning: mpwm@400e8000: #pwm-cells:0:0: 3 was expected Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc18xx: add missed arm,num-irq-priority-bitsFrank Li1-0/+4
Add missed arm,num-irq-priority-bits to fix below CHECK_DTBS warning: arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: interrupt-controller@e000e100 (arm,armv7m-nvic): 'arm,num-irq-priority-bits' is a required property from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc18xx: add #address-cell and #szie-cell for spi flash controllerFrank Li1-0/+2
Add #address-cells and #szie-cells for spi flash controller to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3 arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3 Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc4357-myd-lpc4357: change node name mdio0 to mdioFrank Li1-1/+1
Change node name mdio0 to mdio to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: ethernet@40010000 (nxp,lpc1850-dwmac): Unevaluated properties are not allowed ('mdio0' was unexpected) from schema $id: http://devicetree.org/schemas/net/nxp,lpc1850-dwmac.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc: change node name 'button[0-9]' to button-[0-9]'Frank Li2-13/+13
Change node name 'button[0-9]' to button-[0-9]' to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: pca_buttons (gpio-keys-polled): 'button0', ... do not match any of the regexes: '^(button|...', 'pinctrl-[0-9]+' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc4357-myd-lpc4357: add power-supply for innolux,at070tn92Frank Li1-0/+1
Add power-supply for innolux,at070tn92 to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: panel (innolux,at070tn92): 'power-supply' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc: add cfg surfix in pinctrl child nodeFrank Li2-7/+7
Add cfg surfix in pinctrl child node to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: pinctrl@40086000 (nxp,lpc1850-scu): ssp-pins: 'ssp1_cs', 'ssp1_miso_mosi', 'ssp1_sck' do not match any of the regexes: '^pinctrl-[0-9]+$', '_cfg$' from schema $id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc: add #address-cells and #size-cells for sram nodeFrank Li3-0/+21
Add #address-cells and #size-cells for sram node to fix below DTB_CHECK warnings: arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: sram@2,0 (mmio-sram): '#address-cells' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc18xx: swap clock-names bic and cuiFrank Li1-2/+2
Swap clock-names bic and cui to fix below CHECK_DTB warnings: /home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dtb: mmc@40004000 (snps,dw-mshc): clock-names:0: 'biu' was expected from schema $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml# /home/lizhi/source/linux-upstream-pci/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dtb: mmc@40004000 (snps,dw-mshc): clock-names:1: 'ciu' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc4350-hitex-eval: change node name flash to flash@0Frank Li3-3/+6
Change node name 'flash' to 'flash@0' to fix below CHECK_DTB warnings. arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): Unevaluated properties are not allowed ('flash' was unexpected) from schema $id: http://devicetree.org/schemas/mtd/nxp,lpc1773-spifi.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc18xx: rename node name mmcsd to mmcFrank Li1-1/+1
Change node name mmcsd to mmc to fix CHECK_DTB warnings: arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: mmcsd@40004000 (snps,dw-mshc): $nodename:0: 'mmcsd@40004000' does not match '^mmc(@.*)?$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-11ARM: dts: lpc18xx: rename node name flash-controller to spiFrank Li1-1/+1
Anyway it is SPI controller although intent to connect qspi flash. Rename node name flash-controller to spi to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): $nodename:0: 'flash-controller@40003000' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$ Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2025-09-10ARM: dts: imx6-aristainetos2: Replace license text comment with SPDX identifierBence Csókás3-111/+3
Replace verbatim license text with a `SPDX-License-Identifier`. The comment header mis-attributes this license to be "X11", but the license text does not include the last line "Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.". Therefore, this license is actually equivalent to the SPDX "MIT" license (confirmed by text diffing). Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Bence Csókás <csokas.bence@prolan.hu> Reviewed-by: Heiko Schocher <hs@nabladev.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: vfxxx: add arm,num-irq-priority-bits for nvicFrank Li1-0/+4
Add arm,num-irq-priority-bits(4) for nvic to fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dtb: interrupt-controller@e000e100 (arm,armv7m-nvic): 'arm,num-irq-priority-bits' is a required property from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: vf610: add grp surfix to pinctrlFrank Li2-11/+11
Add grp surfix for pinctrl to fix below CHECK_DTBS warnings: arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dtb: pinctrl@40048000 (fsl,vf610-iomuxc): i2c0grp-gpio: {'fsl,pins': [[144, 0, 0, 0, 12738, 148, 0, 0, 0, 12738]], 'phandle': 19} is not of type 'array' from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: vf: Change the NAND controller node nameFabio Estevam1-1/+1
fsl,vf610-nfc.yaml references nand-controller.yaml, which only allows the node to be 'nand-controller'. Change it accordingly to fix the following dt-schema warning: $nodename:0: 'nand@400e0000' does not match '^nand-controller(@.*)?' Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: vf: Change the pinctrl node nameFabio Estevam1-1/+1
fsl,vf610-iomuxc.yaml references pinctrl.yaml, which only allows the node to be either 'pinctrl' or 'pinmux'. Change the node name to 'pinctrl' to fix the following dt-schema warning: iomuxc@40048000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: nxp: imx6ull: Minor whitespace cleanupKrzysztof Kozlowski1-1/+1
The DTS code coding style expects exactly one space around '=' character. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: ls1021a: rename rcpm as wakeup-control from power-controlAlexander Stein1-2/+1
Invoke power-domain.yaml if node name as 'power-control'. Rcpm actually are not power domain controller. It just control wakeup capability. So rename it as wakeup-control. Implements the same change as commit e39f567e1c38c ("arm64: dts: layerscape: rename rcpm as wakeup-control from power-control") for arm64 layerscapes. While at it, also remove superfluous #power-domain-cells Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: ls1021a-tqmals1021a-mbsl1021a: Remove superfluous compatibleAlexander Stein2-2/+2
The touchscreen compatible in the overlays has one extra entry. Remove it to fix the dtbs_check warning: touchscreen@38 (edt,edt-ft5406): compatible: ['edt,edt-ft5406', 'edt,edt-ft5x06'] is too long Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-08-22ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for ↵Alexander Stein1-2/+0
qflash The jedec SPI-NOR flash node itself has no partitions, but the partitions subnode. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-12-13 17:24:27 +0000